Si─O Molecular Engineering Enhances Cathode‐Anode Interface Stability for High‐Loading and High‐Voltage Layered Cathode‐Lithium Metal Batteries
Angewandte Chemie International Edition · 11.08.2025 · 64 (33)
DOI: 10.1002/anie.202508008 ↗Kurz gefasst
Fachartikel in der Zeitschrift Angewandte Chemie International Edition, online erschienen am 29.06.2025. Verfasst von Shangjuan Yang und 7 weiteren Autor:innen. Beteiligte Einrichtung: Shenzhen All-Solid-State Lithium Battery Electrolyte Engineering Research Center, Institute of Materials Research (IMR), Tsinghua Shenzhen Internatio…. Die Arbeit wurde bisher 17-mal zitiert (Crossref) und nennt 56 Literaturangaben. Gefördert von: National Key Research and Development Program of China, National Natural Science Foundation of China, National Science Fund for Distinguished Young Scholars.
Abstract (Originalsprache)
Nickel‐rich layered cathodes and lithium metal anode are promising for the next generation high‐energy‐density batteries. However, the unstable electrode‐electrolyte interface induces structural degradation and battery failure under high‐voltage and high‐loading conditions. Herein, we report a fluorosilane‐coupled electrolyte stabilizer with 1H, 1H, 2H, 2H‐perfluorooctyltrimethoxysilane (PFOTMS), which presents higher adsorption energy with LiNi 0.8 Co 0.1 Mn 0.1 O 2 cathode than solvents through the conjugation of Si─O bonds and therefore is oxidized on its surface to derive an interfacial layer rich in F and Si─O species. This architecture effectively stabilizes the cathode structure, suppresses transition metal migration, and promotes Li + conduction and uniform deposition, which also suppresses the side reactions of electrolyte with both cathode and anode. This unique interfacial stabilization mechanism enables the Li||NCM811 battery to achieve a capacity retention rate of 80.8% after 600 cycles at 4.7 V. The Li||LiCoO 2 cell with a high mass loading of 20 mg cm −2 achieves a remarkably high‐capacity retention of 92.79% after 500 cycles at 4.4 V. This work proposes an interfacial stabilization that overcomes high‐voltage limitations in practical nickel‐rich cathode/lithium metal batteries.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Shenzhen All-Solid-State Lithium Battery Electrolyte Engineering Research Center, Institute of Materials Research (IMR), Tsinghua Shenzhen International Graduate School, Shenzhen, 518055, China.
- School of Energy and Power Engineering, North University of China, Taiyuan, 030051, P.R. China.
ORCID-Profile: Danfeng Zhang, Yan-Bing He
Förderung
- National Key Research and Development Program of China
- National Natural Science Foundation of China
- National Science Fund for Distinguished Young Scholars
- Tsinghua Shenzhen International Graduate School-Shenzhen Pengrui Young Faculty Program of Shenzhen Pengrui Foundation
- Shenzhen Technical Plan Project
- Shenzhen All-Solid-State Lithium Battery Electrolyte Engineering Research Centre Upgrade Project
- Graduate Education Innovation Grants, Tsinghua University
Zitieren
APA
Yang, S., Lao, Z., Han, Z., Su, H., Xiao, G., Zhou, G., Zhang, D., & He, Y. B. (2025). Si─O Molecular Engineering Enhances Cathode‐Anode Interface Stability for High‐Loading and High‐Voltage Layered Cathode‐Lithium Metal Batteries. Angewandte Chemie International Edition, 64(33). https://doi.org/10.1002/anie.202508008
Vancouver
Yang S, Lao Z, Han Z, Su H, Xiao G, Zhou G, et al. Si─O Molecular Engineering Enhances Cathode‐Anode Interface Stability for High‐Loading and High‐Voltage Layered Cathode‐Lithium Metal Batteries. Angewandte Chemie International Edition. 2025;64(33). doi:10.1002/anie.202508008
BibTeX
@article{Yang2025,
author = {Yang, Shangjuan and Lao, Zhoujie and Han, Zhuo and Su, Hai and Xiao, Guanyou and Zhou, Guangmin and Zhang, Danfeng and He, Yan-Bing},
title = {Si─O Molecular Engineering Enhances Cathode‐Anode Interface Stability for High‐Loading and High‐Voltage Layered Cathode‐Lithium Metal Batteries},
journal = {Angewandte Chemie International Edition},
year = {2025},
volume = {64},
number = {33},
doi = {10.1002/anie.202508008}
}
EUVIMED