EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Cross‐Linked Amine Interface Engineering Strategy for High Performance Anode‐Free Lithium‐Metal Batteries With High‐Loading Cathodes

Hyeong Seop Jeong, Daehyun Kim, Ga Hyeon Lee, Liting Zhang, Ye‐Won Kim, Junyeong Lee, Min Kyeong Kim, DongIl Kim, Jin Pyo Hong, Woon Bae Park, Jung Inn Sohn, John Hong

Advanced Functional Materials · 2026-04 · 36 (32)

DOI: 10.1002/adfm.202527860 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Functional Materials, online erschienen am 30.12.2025. Verfasst von Hyeong Seop Jeong und 11 weiteren Autor:innen. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 59 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0). Gefördert von: Ministry of Science and ICT, South Korea.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Anode‐free lithium‐metal batteries (AFLMBs), wherein Li is plated onto a bare Cu current collector during the initial charge, feature a simplified architecture and high energy density. However, in AFLMBs employing high‐mass‐loading cathodes, the intrinsically poor lithiophilicity of bare Cu induces uncontrolled dendrite growth, irreversible lithium loss, and an unstable solid electrolyte interphase (SEI), resulting in rapid capacity decay and a low Coulombic efficiency (CE). Herein, an ultrathin, cross‐linked polyethylenimine (PEI) coating is proposed as a simple yet effective interfacial engineering strategy to stabilize the anode–electrolyte interface through dual mechanisms. Abundant amine groups coordinate strongly with Li⁺, promoting homogeneous nucleation and vertical deposition while restricting lateral diffusion. The flexible polymer matrix acts as a robust barrier against parasitic reactions and corrosion. Consequently, Cu||Li half‐cells with PEI‐coated Cu sustain 350 cycles at 0.5 mA cm −2 and 0.5 mAh cm −2 , delivering an average CE of 95.29%. Full cells with high‐loading LiFePO 4 cathodes (26.52 mg cm −2 ) retain 57.65% of their initial capacity (3.26 to 1.87 mAh cm −2 ) after 100 cycles. These findings highlight nanoscale polymer coatings as a promising strategy for constructing stable artificial SEI layers in AFLMBs, yielding high‐energy and durable Li‐ion batteries.

Förderung

  • Ministry of Science and ICT, South Korea

Zitieren

APA

Jeong, H. S., Kim, D., Lee, G. H., Zhang, L., Kim, Y., Lee, J., Kim, M. K., Kim, D., Hong, J. P., Park, W. B., Sohn, J. I., & Hong, J. (2026). Cross‐Linked Amine Interface Engineering Strategy for High Performance Anode‐Free Lithium‐Metal Batteries With High‐Loading Cathodes. Advanced Functional Materials, 36(32). https://doi.org/10.1002/adfm.202527860

Vancouver

Jeong HS, Kim D, Lee GH, Zhang L, Kim Y, Lee J, et al. Cross‐Linked Amine Interface Engineering Strategy for High Performance Anode‐Free Lithium‐Metal Batteries With High‐Loading Cathodes. Advanced Functional Materials. 2026;36(32). doi:10.1002/adfm.202527860

BibTeX
@article{Jeong2026,
  author = {Jeong, Hyeong Seop and Kim, Daehyun and Lee, Ga Hyeon and Zhang, Liting and Kim, Ye‐Won and Lee, Junyeong and Kim, Min Kyeong and Kim, DongIl and Hong, Jin Pyo and Park, Woon Bae and Sohn, Jung Inn and Hong, John},
  title = {Cross‐Linked Amine Interface Engineering Strategy for High Performance Anode‐Free Lithium‐Metal Batteries With High‐Loading Cathodes},
  journal = {Advanced Functional Materials},
  year = {2026},
  volume = {36},
  number = {32},
  doi = {10.1002/adfm.202527860}
}
Kostenlos starten →