Eutectic‐Based Polymer Electrolyte with the Enhanced Lithium Salt Dissociation for High‐Performance Lithium Metal Batteries
Angewandte Chemie International Edition · 26.10.2023 · 62 (44)
DOI: 10.1002/anie.202310006 ↗Kurz gefasst
Fachartikel in der Zeitschrift Angewandte Chemie International Edition, online erschienen am 26.09.2023. Verfasst von Dechao Zhang und 8 weiteren Autor:innen. Beteiligte Einrichtung: Guangdong Provincial Key Laboratory of Advanced Energy Storage Materials, School of Materials Science and Engineering, South China University of Tech…. Die Arbeit wurde bisher 143-mal zitiert (Crossref) und nennt 48 Literaturangaben. Gefördert von: National Key Research and Development Program of China.
Abstract (Originalsprache)
The deployment of lithium metal anode in solid‐state batteries with polymer electrolytes has been recognized as a promising approach to achieving high‐energy‐density technologies. However, the practical application of the polymer electrolytes is currently constrained by various challenges, including low ionic conductivity, inadequate electrochemical window, and poor interface stability. To address these issues, a novel eutectic‐based polymer electrolyte consisting of succinonitrile (SN) and poly (ethylene glycol) methyl ether acrylate (PEGMEA) is developed. The research results demonstrate that the interactions between SN and PEGMEA promote the dissociation of the lithium difluoro(oxalato) borate (LiDFOB) salt and increase the concentration of free Li + . The well‐designed eutectic‐based PAN 1.2 ‐SPE (PEGMEA: SN=1: 1.2 mass ratio) exhibits high ionic conductivity of 1.30 mS cm −1 at 30 °C and superior interface stability with Li anode. The Li/Li symmetric cell based on PAN 1.2 ‐SPE enables long‐term plating/stripping at 0.3 and 0.5 mA cm −2 , and the Li/LiFePO 4 cell achieves superior long‐term cycling stability (capacity retention of 80.3 % after 1500 cycles). Moreover, Li/LiFePO 4 and Li/LiNi 0.6 Co 0.2 Mn 0.2 O 2 pouch cells employing PAN 1.2 ‐SPE demonstrate excellent cycling and safety characteristics. This study presents a new pathway for designing high‐performance polymer electrolytes and promotes the practical application of high‐stable lithium metal batteries.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Guangdong Provincial Key Laboratory of Advanced Energy Storage Materials, School of Materials Science and Engineering, South China University of Technology, Guangzhou, 510641, China.
- Department of Materials Science and Engineering, City University of Hong Kong, Kowloon, 999077, Hong Kong SAR, China.
- School of Chemical Engineering and Light Industry, Guangdong University of Technology, Guangzhou, 510006, China.
ORCID-Profile: Jun Liu
Förderung
- National Key Research and Development Program of China
Zitieren
APA
Zhang, D., Liu, Y., Sun, Z., Liu, Z., Xu, X., Xi, L., Ji, S., Zhu, M., & Liu, J. (2023). Eutectic‐Based Polymer Electrolyte with the Enhanced Lithium Salt Dissociation for High‐Performance Lithium Metal Batteries. Angewandte Chemie International Edition, 62(44). https://doi.org/10.1002/anie.202310006
Vancouver
Zhang D, Liu Y, Sun Z, Liu Z, Xu X, Xi L, et al. Eutectic‐Based Polymer Electrolyte with the Enhanced Lithium Salt Dissociation for High‐Performance Lithium Metal Batteries. Angewandte Chemie International Edition. 2023;62(44). doi:10.1002/anie.202310006
BibTeX
@article{Zhang2023,
author = {Zhang, Dechao and Liu, Yuxuan and Sun, Zhaoyu and Liu, Zhengbo and Xu, Xijun and Xi, Lei and Ji, Shaomin and Zhu, Min and Liu, Jun},
title = {Eutectic‐Based Polymer Electrolyte with the Enhanced Lithium Salt Dissociation for High‐Performance Lithium Metal Batteries},
journal = {Angewandte Chemie International Edition},
year = {2023},
volume = {62},
number = {44},
doi = {10.1002/anie.202310006}
}
EUVIMED