EUVIMEDEUVIMED entdecken
Crossref

Chloride‐Enhanced High‐Strength Polymer Electrolyte for Lithium‐Metal Batteries

Kequan Yao, Jingyi Liu, Runyu Liu, Ke Gao, Qiang Bai, Chunrong Ma, Hua Xie

Advanced Energy Materials · 2026-01 · 16 (1)

DOI: 10.1002/aenm.202504054 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Energy Materials, online erschienen am 30.10.2025. Verfasst von Kequan Yao und 6 weiteren Autor:innen. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 43 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Polymer‐based electrolytes have emerged as attractive candidates for solid‐state batteries owing to their facile processability, excellent interfacial compatibility, and cost‐effectiveness. However, their excessive crystallinity, disrupted ion pathways, and inadequate mechanical performance directly impair ionic conductivity and cycling stability. Herein, a synergistic strategy is reported to simultaneously incorporate LiCl and ZrCl 4 in a poly (ethylene oxide)/poly (vinylidene fluoride) (PEO/PVDF) electrolyte matrix to achieve enhanced structural and electrochemical properties. The introduction of LiCl and Lewis‐acidic ZrCl 4 increased the lithium‐ion transference number to 0.56 and promoted the formation of a stable, LiF‐ and LiCl‐rich electrolyte interphase layer on the lithium anode. The symmetric cells exhibited a critical current density of 3.1 mA cm −2 and demonstrated stable cycling for over 400 h at a current density of 0.7 mA cm −2 , and full cells paired with LiFePO 4 cathode (3.8 mg cm −2 ) retained 88.4% of their initial capacity after 1000 cycles. The electrolyte exhibits a tensile strength of 12 MPa with an elongation of 210%, achieving an excellent balance between mechanical strength, flexibility, and processability. This dual‐filler strategy provides a practical and effective approach for enhancing polymer electrolyte performance and holds great promise for broad applications in solid‐state lithium batteries.

Zitieren

APA

Yao, K., Liu, J., Liu, R., Gao, K., Bai, Q., Ma, C., & Xie, H. (2026). Chloride‐Enhanced High‐Strength Polymer Electrolyte for Lithium‐Metal Batteries. Advanced Energy Materials, 16(1). https://doi.org/10.1002/aenm.202504054

Vancouver

Yao K, Liu J, Liu R, Gao K, Bai Q, Ma C, et al. Chloride‐Enhanced High‐Strength Polymer Electrolyte for Lithium‐Metal Batteries. Advanced Energy Materials. 2026;16(1). doi:10.1002/aenm.202504054

BibTeX
@article{Yao2026,
  author = {Yao, Kequan and Liu, Jingyi and Liu, Runyu and Gao, Ke and Bai, Qiang and Ma, Chunrong and Xie, Hua},
  title = {Chloride‐Enhanced High‐Strength Polymer Electrolyte for Lithium‐Metal Batteries},
  journal = {Advanced Energy Materials},
  year = {2026},
  volume = {16},
  number = {1},
  doi = {10.1002/aenm.202504054}
}
Kostenlos starten →