EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Multifunctional Matrix‐Activated Electrodes Enabling Efficient Proton Transport and Durable Low‐Pt Operation for High‐Temperature Proton Exchange Membrane Fuel Cells

Gyeongseok Gwak, Sunjin Park, Joonbyum Kim, Hena Lee, Jihyeon Ok, Chae Young Lee, JunHwa Kwon, Jong Geun Seong, Sung Pil Yoon, Suk‐Woo Nam, Hansung Kim, Katie Heeyum Lim und 1 weitere

Advanced Energy Materials · 2026-11 · 16 (41)

DOI: 10.1002/aenm.71438 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Energy Materials, online erschienen am 10.09.2026. Verfasst von Gyeongseok Gwak und 12 weiteren Autor:innen. Die Arbeit nennt 78 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: National Research Foundation of Korea.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Phosphoric acid (PA)‐related challenges, including PA loss, redistribution, and flooding, critically limit the performance and long‐term durability of high‐temperature proton exchange membrane fuel cells (HT‐PEMFCs) based on PA‐doped membrane electrode assemblies. Although these issues can be partially mitigated using proton‐conducting additives and hydrophobic polytetrafluoroethylene, practical commercialization remains impeded by restricted high‐temperature operability and the requirement for high Pt loadings. To address these challenges, here we report a cerium hydrogen phosphate (CeHP)‐integrated multifunctional matrix‐activated electrode (MME) that stabilizes PA‐containing electrode microenvironments and preserve electrochemical pathways under severe high‐temperature operation above 200°C, where acid evaporation, dehydration, and migration become increasingly pronounced. This integrated matrix combines high‐temperature proton‐conduction, radical scavenging, and structural reinforcement of the porous catalyst layer, consequently alleviating the degradation at such high temperature. As a result, the optimized MME delivers a 38% increase in peak power density and a 62% reduction in voltage decay rate at 240°C, while requiring only 40% of the Pt loading of a Celtec commercial HT‐PEMFC electrode (0.4 vs. 1.0 mg Pt cm −2 per electrode). These results establish multifunctional catalyst‐layer matrix engineering as an effective strategy for enabling durable, low‐Pt HT‐PEMFC operation in acid‐doped polymer electrochemical systems under harsh high‐temperature conditions.

Förderung

  • National Research Foundation of Korea

Zitieren

APA

Gwak, G., Park, S., Kim, J., Lee, H., Ok, J., Lee, C. Y., Kwon, J., Seong, J. G., Yoon, S. P., Nam, S., Kim, H., Lim, K. H., & Lee, S. Y. (2026). Multifunctional Matrix‐Activated Electrodes Enabling Efficient Proton Transport and Durable Low‐Pt Operation for High‐Temperature Proton Exchange Membrane Fuel Cells. Advanced Energy Materials, 16(41). https://doi.org/10.1002/aenm.71438

Vancouver

Gwak G, Park S, Kim J, Lee H, Ok J, Lee CY, et al. Multifunctional Matrix‐Activated Electrodes Enabling Efficient Proton Transport and Durable Low‐Pt Operation for High‐Temperature Proton Exchange Membrane Fuel Cells. Advanced Energy Materials. 2026;16(41). doi:10.1002/aenm.71438

BibTeX
@article{Gwak2026,
  author = {Gwak, Gyeongseok and Park, Sunjin and Kim, Joonbyum and Lee, Hena and Ok, Jihyeon and Lee, Chae Young and Kwon, JunHwa and Seong, Jong Geun and Yoon, Sung Pil and Nam, Suk‐Woo and Kim, Hansung and Lim, Katie Heeyum and Lee, So Young},
  title = {Multifunctional Matrix‐Activated Electrodes Enabling Efficient Proton Transport and Durable Low‐Pt Operation for High‐Temperature Proton Exchange Membrane Fuel Cells},
  journal = {Advanced Energy Materials},
  year = {2026},
  volume = {16},
  number = {41},
  doi = {10.1002/aenm.71438}
}
Kostenlos starten →