EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Durable Proton Exchange Membrane Based on Polymers of Intrinsic Microporosity for Fuel Cells

Xiaochen Yang iD, Zhiming Feng, Mustafa Alshurafa, Ming Yu, Andrew B Foster, Heng Zhai, Tianmu Yuan, Yiheng Xiao, Carmine D'Agostino, Ling Ai, Maria Perez-Page, Keenan Smith und 6 weitere

Advanced Materials · 2025-05 · 37 (19)

DOI: 10.1002/adma.202419534 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 27.03.2025. Verfasst von Xiaochen Yang und 17 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemical Engineering, The University of Manchester, Manchester, M13 9PL, UK. Die Arbeit wurde bisher 35-mal zitiert (Crossref) und nennt 69 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: EPSRC Programme, Engineering and Physical Sciences Research Council.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

High‐temperature proton exchange membrane fuel cells (HT‐PEMFCs) is regarded as a promising energy conversion system owing to simplified water management and enhanced tolerance to fuel impurities. However, phosphoric acid (PA) leaching remains a critical issue, diminishing energy density and durability, posing significant obstacle to the commercial development of HT‐PEMFCs. To address this, composite membranes incorporating the carboxylic acid‐modified polymer of intrinsic microporosity (cPIM‐1) are designed as framework polymer, blended with polyvinylpyrrolidone (PVP) for HT‐PEMFCs. The Lewis acid‐base interactions between cPIM‐1 and PVP created an extensive hydrogen‐bonding network, improving membrane compatibility. The optimized microporous structure and multiple anchoring sites gave rise to “domain‐limited” PA clusters, enhancing the capillary effect. Simultaneously, improved hydrophobicity synergistically optimizes catalytic interface, promoting continuous and stable proton transfer. The HT‐PEMFCs based on PVP/cPIM‐1 composite membrane achieved a peak power density of 1090.0 mW cm −2 at 160 °C, representing a 152% improvement compared to PVP/PES membrane. Additionally, it demonstrated excellent durability, with a voltage decay of 0.058 mV h −1 over 210 h of accelerated stress test corresponds to more than 5000 h of constant current density durability test. This study presents a promising strategy for the development of high‐performance and durable novel membranes in various energy conversion systems.

Schlagwörter

Stichwörter der Autor:innen

PIM‐1fuel cellmicroporous structurephosphoric acidproton exchange membrane

Autor:innen und Institutionen

  • Department of Chemical Engineering, The University of Manchester, Manchester, M13 9PL, UK.
  • Department of Chemistry, The University of Manchester, Manchester, M13 9PL, UK.
  • Department of Chemical Engineering, The University of Melbourne, Melbourne, VIC, 3010, Australia.
  • Department of Chemistry, University College London, London, WC1H 0AJ, UK.
  • Department of Chemical Engineering, University College London, London, WC1E 7JE, UK.

ORCID-Profile: Xiaochen Yang, Stuart M Holmes

Förderung

  • EPSRC Programme
  • Engineering and Physical Sciences Research Council

Zitieren

APA

Yang, X., Feng, Z., Alshurafa, M., Yu, M., Foster, A. B., Zhai, H., Yuan, T., Xiao, Y., D'Agostino, C., Ai, L., Perez-Page, M., Smith, K., Foglia, F., Lovett, A., Miller, T. S., Chen, J., Budd, P. M., & Holmes, S. M. (2025). Durable Proton Exchange Membrane Based on Polymers of Intrinsic Microporosity for Fuel Cells. Advanced Materials, 37(19). https://doi.org/10.1002/adma.202419534

Vancouver

Yang X, Feng Z, Alshurafa M, Yu M, Foster AB, Zhai H, et al. Durable Proton Exchange Membrane Based on Polymers of Intrinsic Microporosity for Fuel Cells. Advanced Materials. 2025;37(19). doi:10.1002/adma.202419534

BibTeX
@article{Yang2025,
  author = {Yang, Xiaochen and Feng, Zhiming and Alshurafa, Mustafa and Yu, Ming and Foster, Andrew B and Zhai, Heng and Yuan, Tianmu and Xiao, Yiheng and D'Agostino, Carmine and Ai, Ling and Perez-Page, Maria and Smith, Keenan and Foglia, Fabrizia and Lovett, Adam and Miller, Thomas S and Chen, Jianuo and Budd, Peter M and Holmes, Stuart M},
  title = {Durable Proton Exchange Membrane Based on Polymers of Intrinsic Microporosity for Fuel Cells},
  journal = {Advanced Materials},
  year = {2025},
  volume = {37},
  number = {19},
  doi = {10.1002/adma.202419534}
}
Kostenlos starten →