EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

In‐Scribe Silane Bonding for Mechanical Reinforcement of Perovskite Photovoltaic Modules

Muzhi Li, Robert Witteck, Xinwen Zhang, Duong Nguyen Minh, Rosemary C. Bramante, Harvey Guthrey, Steven P. Harvey, Brian Habersberger, Joseph M. Luther, Nicholas Rolston, Lance M. Wheeler

Advanced Energy Materials · 2025-09 · 15 (34)

DOI: 10.1002/aenm.202501322 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Energy Materials, online erschienen am 30.06.2025. Verfasst von Muzhi Li und 10 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 51 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0). Gefördert von: Solar Energy Technologies Office, National Science Foundation.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Despite the extraordinary rise in power conversion efficiency over the last decade, metal halide perovskite (MHP) photovoltaics remain more mechanically fragile than other PV technologies. In this work, the scribe area, created by the monolithic interconnection of thin‐film solar cells, is used to extrinsically reinforce the mechanical robustness of packaged MHP solar modules. In contrast to the epoxy‐based chemistries often leveraged in the MHP literature, silane‐grafted polyolefin encapsulants are designed to form strong covalent bonds to oxide surfaces, specifically to glass and the transparent conductive oxide at the base of the scribe line. Pseudo‐modules encapsulated with silane‐grafted polyolefin are measured with more than an order‐of‐magnitude enhancement infracture energy from 0.27 ± 0.01 J·m −2 (no scribes) to 5.97 ± 0.42 J·m −2 (scribes perpendicular to delamination directioncovering ≈2.2% of the module area). The silane‐grafted polyolefin retains strong adhesion even after undergoing an accelerated IEC 61215 thermal cycling test consisting of 250 cycles. We find that the in‐scribe bonding allows perovskite modules to have adhesion strength comparable to commercial c‐Si and CdTe technologies with only 5% reduction in the active module area. This manufacturing‐compatible approach offers a practical solution to address the mechanical integrity challenges in MHP solar modules, regardless of cell architecture.

Förderung

  • Solar Energy Technologies Office
  • National Science Foundation

Zitieren

APA

Li, M., Witteck, R., Zhang, X., Minh, D. N., Bramante, R. C., Guthrey, H., Harvey, S. P., Habersberger, B., Luther, J. M., Rolston, N., & Wheeler, L. M. (2025). In‐Scribe Silane Bonding for Mechanical Reinforcement of Perovskite Photovoltaic Modules. Advanced Energy Materials, 15(34). https://doi.org/10.1002/aenm.202501322

Vancouver

Li M, Witteck R, Zhang X, Minh DN, Bramante RC, Guthrey H, et al. In‐Scribe Silane Bonding for Mechanical Reinforcement of Perovskite Photovoltaic Modules. Advanced Energy Materials. 2025;15(34). doi:10.1002/aenm.202501322

BibTeX
@article{Li2025,
  author = {Li, Muzhi and Witteck, Robert and Zhang, Xinwen and Minh, Duong Nguyen and Bramante, Rosemary C. and Guthrey, Harvey and Harvey, Steven P. and Habersberger, Brian and Luther, Joseph M. and Rolston, Nicholas and Wheeler, Lance M.},
  title = {In‐Scribe Silane Bonding for Mechanical Reinforcement of Perovskite Photovoltaic Modules},
  journal = {Advanced Energy Materials},
  year = {2025},
  volume = {15},
  number = {34},
  doi = {10.1002/aenm.202501322}
}
Kostenlos starten →