EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Engineering Perovskite Precursor Inks for Scalable Production of High‐Efficiency Perovskite Photovoltaic Modules

Jaehoon Chung, Seung‐Woo Kim, You Li, Tamanna Mariam, Xiaoming Wang, Manoj Rajakaruna, Muhammad Mohsin Saeed, Abasi Abudulimu, Seong Sik Shin, Kathryn N. Guye, Zixu Huang, Robert J. E. Westbrook und 8 weitere

Advanced Energy Materials · 2023-06 · 13 (22)

DOI: 10.1002/aenm.202300595 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Energy Materials, online erschienen am 22.04.2023. Verfasst von Jaehoon Chung und 19 weiteren Autor:innen. Die Arbeit wurde bisher 93-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, Solar Energy Technologies Office.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Blade coating of perovskite solar cells (PSCs) and modules has progressed considerably toward the industrial production of perovskite photovoltaics. Developing stable perovskite precursors is critical for achieving uniform coating over large areas. Here, the engineering of a perovskite precursor solution consisting of 2‐methoxyethanol (2‐Me) and 1,3‐dimethyl‐imidazolidinone (DMI) with superior intermediate phase stability that enables scalable production of efficient perovskite solar modules is reported. With this perovskite precursor solution, uniform and pinhole‐less perovskite film is deposited over a large area of > 100 cm 2 and higher‐efficiency PSCs and modules are obtained. The best‐performing unit cell and module with n‐i‐p configuration reach power conversion efficiencies of 23.4% and 20.1%, respectively. Additionally, a series of non‐destructive metrology methods, such as spectroscopic ellipsometry, hyperspectral photoluminescence, electroluminescence, and laser beam‐induced current mapping, are employed to assess and guide the development the blade‐coated perovskite modules. This results show that rational engineering of precursor inks for blade coating is promising for the scalable production of efficient perovskite solar modules.

Förderung

  • U.S. Department of Energy
  • Office of Energy Efficiency and Renewable Energy
  • Solar Energy Technologies Office
  • Air Force Research Laboratory

Zitieren

APA

Chung, J., Kim, S., Li, Y., Mariam, T., Wang, X., Rajakaruna, M., Saeed, M. M., Abudulimu, A., Shin, S. S., Guye, K. N., Huang, Z., Westbrook, R. J. E., Miller, E., Subedi, B., Podraza, N. J., Heben, M. J., Ellingson, R. J., Ginger, D. S., Song, Z., & Yan, Y. (2023). Engineering Perovskite Precursor Inks for Scalable Production of High‐Efficiency Perovskite Photovoltaic Modules. Advanced Energy Materials, 13(22). https://doi.org/10.1002/aenm.202300595

Vancouver

Chung J, Kim S, Li Y, Mariam T, Wang X, Rajakaruna M, et al. Engineering Perovskite Precursor Inks for Scalable Production of High‐Efficiency Perovskite Photovoltaic Modules. Advanced Energy Materials. 2023;13(22). doi:10.1002/aenm.202300595

BibTeX
@article{Chung2023,
  author = {Chung, Jaehoon and Kim, Seung‐Woo and Li, You and Mariam, Tamanna and Wang, Xiaoming and Rajakaruna, Manoj and Saeed, Muhammad Mohsin and Abudulimu, Abasi and Shin, Seong Sik and Guye, Kathryn N. and Huang, Zixu and Westbrook, Robert J. E. and Miller, Emily and Subedi, Biwas and Podraza, Nikolas J. and Heben, Michael J. and Ellingson, Randy J. and Ginger, David S. and Song, Zhaoning and Yan, Yanfa},
  title = {Engineering Perovskite Precursor Inks for Scalable Production of High‐Efficiency Perovskite Photovoltaic Modules},
  journal = {Advanced Energy Materials},
  year = {2023},
  volume = {13},
  number = {22},
  doi = {10.1002/aenm.202300595}
}
Kostenlos starten →