EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Additive Engineering of Sequentially Evaporated FAPbI 3 Solar Cells

Elena Siliavka, Thalia Pandelides, Vladimir V. Shilovskikh, Angelika Wrzesinska‐Lashkova, Zongbao Zhang, Ran Ji, Boris Rivkin, Yana Vaynzof

Advanced Energy Materials · 2025-08 · 15 (30)

DOI: 10.1002/aenm.202500963 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Energy Materials, online erschienen am 11.07.2025. Verfasst von Elena Siliavka und 7 weiteren Autor:innen. Die Arbeit wurde bisher 17-mal zitiert (Crossref) und nennt 54 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: China Scholarship Council, Deutsche Forschungsgemeinschaft.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Despite the tremendous progress made in the field of perovskite solar cells, their commercialization remains hindered by several challenges, including scalability, stability, and sustainability. Thermal evaporation is a solvent‐free, scalable, and industrially relevant method, yet despite its many advantages, this method is limited by the lack of additive engineering strategies for controlling the growth of perovskite layers. Here, a novel additive engineering strategy is reported that enables the complete conversion of precursors to a perovskite phase during the two‐step deposition of formamidinium lead triiodide (FAPbI 3 ). The approach is based on the co‐evaporation of potassium‐containing additives (KI and KSCN) alongside PbI 2 during the first deposition step, followed by the evaporation of formamidinium iodide. It is demonstrated that the absence of additives leads to an incomplete conversion with a substantial amount of unconverted PbI 2 remaining at the buried interface. On the other hand, the co‐evaporation of the additives improves the conversion process, leading, in the case of KSCN, to phase‐pure α‐FAPbI 3 with improved microstructure. The additive‐engineered p‐i‐n devices achieve efficiencies up to 18.34%, among the highest reported for evaporated FAPbI 3 solar cells without interfacial passivation. This work highlights the great potential of additive engineering for controlling the film formation of thermally evaporated perovskites.

Förderung

  • China Scholarship Council
  • Deutsche Forschungsgemeinschaft

Zitieren

APA

Siliavka, E., Pandelides, T., Shilovskikh, V. V., Wrzesinska‐Lashkova, A., Zhang, Z., Ji, R., Rivkin, B., & Vaynzof, Y. (2025). Additive Engineering of Sequentially Evaporated FAPbI 3 Solar Cells. Advanced Energy Materials, 15(30). https://doi.org/10.1002/aenm.202500963

Vancouver

Siliavka E, Pandelides T, Shilovskikh VV, Wrzesinska‐Lashkova A, Zhang Z, Ji R, et al. Additive Engineering of Sequentially Evaporated FAPbI 3 Solar Cells. Advanced Energy Materials. 2025;15(30). doi:10.1002/aenm.202500963

BibTeX
@article{Siliavka2025,
  author = {Siliavka, Elena and Pandelides, Thalia and Shilovskikh, Vladimir V. and Wrzesinska‐Lashkova, Angelika and Zhang, Zongbao and Ji, Ran and Rivkin, Boris and Vaynzof, Yana},
  title = {Additive Engineering of Sequentially Evaporated FAPbI 3 Solar Cells},
  journal = {Advanced Energy Materials},
  year = {2025},
  volume = {15},
  number = {30},
  doi = {10.1002/aenm.202500963}
}
Kostenlos starten →