EUVIMEDSkopri EUVIMED
Crossref

Lattice Plainification and Intercalation Advances Power Generation and Thermoelectric Cooling in n‐type Bi 2 (Te, Se) 3

Jiayi Peng, Dongrui Liu, Shulin Bai, Yi Wen, Huiqiang Liang, Lizhong Su, Xin Qian, Dongyang Wang, Xiang Gao, Zhihai Ding, Qian Cao, Yanling Pei and 2 more

Advanced Energy Materials · 2025-05 · 15 (18)

DOI: 10.1002/aenm.202404653 ↗

At a glance

Journal article in Advanced Energy Materials, published online on 2025-01-02. Written by Jiayi Peng and 13 co-authors. Cited 47 times so far (Crossref); 67 references. Funded by: National Science Fund for Distinguished Young Scholars, National Natural Science Foundation of China, Natural Science Foundation of Beijing Municipality.

AstrattDettalji biblijografiċiCiteRelated studies

Abstract (original language)

Bismuth telluride (Bi 2 Te 3 ) has been the only commercialized material in thermoelectric cooling and waste heat recovery. However, the inferior performance for n‐type Bi 2 (Te, Se) 3 largely restricts the practical applications. In this study, additional Ag atoms are introduced utilizing lattice plainification strategy to enhance electrical performance. Observations indicate that Ag atoms situate in the van der Waals layers, acting as n‐type dopants to increase carrier concentration, bonding with adjacent Te as intercalating atoms to form electron transport channels, while also suppressing the formation of Te vacancies to boost carrier mobility, substantially favoring carrier transport. Consequently, Bi 2 Te 2.79 Se 0.21 I 0.004 +0.3%Ag achieves an excellent room‐temperature ZT of ≈1.1, while Bi 2 Te2 .79 Se 0.21 I 0.004 + 0.4%Ag demonstrates a higher average ZT of ≈1.1 at 300–523 K. Furthermore, a full‐scale thermoelectric cooler using optimized Bi 2 Te 2.79 Se 0.21 I 0.004 +0.3%Ag combined with commercial p‐type Bi 0.5 Sb 1.5 Te 3 has achieved a maximum cooling temperature difference (Δ T max ) of ≈68.3 K at 300 K and a larger Δ T max of ≈84.8 K at 343 K. Additionally, the Bi 2 Te 2.79 Se 0.21 I 0.004 + 0.4%Ag/Bi 0.5 Sb 1.5 Te 3 ‐based power generator realizes a conversion efficiency of ≈6.0% under a Δ T of ≈240 K. These results outperform commercial Bi 2 Te 3 ‐based devices, illustrating the effectiveness of lattice plainification for Bi 2 Te 3 ‐based thermoelectrics.

Funding

  • National Science Fund for Distinguished Young Scholars
  • National Natural Science Foundation of China
  • Natural Science Foundation of Beijing Municipality
  • Higher Education Discipline Innovation Project
  • China Postdoctoral Science Foundation

Cite

APA

Peng, J., Liu, D., Bai, S., Wen, Y., Liang, H., Su, L., Qian, X., Wang, D., Gao, X., Ding, Z., Cao, Q., Pei, Y., Qin, B., & Zhao, L. (2025). Lattice Plainification and Intercalation Advances Power Generation and Thermoelectric Cooling in n‐type Bi 2 (Te, Se) 3. Advanced Energy Materials, 15(18). https://doi.org/10.1002/aenm.202404653

Vancouver

Peng J, Liu D, Bai S, Wen Y, Liang H, Su L, et al. Lattice Plainification and Intercalation Advances Power Generation and Thermoelectric Cooling in n‐type Bi 2 (Te, Se) 3. Advanced Energy Materials. 2025;15(18). doi:10.1002/aenm.202404653

BibTeX
@article{Peng2025,
  author = {Peng, Jiayi and Liu, Dongrui and Bai, Shulin and Wen, Yi and Liang, Huiqiang and Su, Lizhong and Qian, Xin and Wang, Dongyang and Gao, Xiang and Ding, Zhihai and Cao, Qian and Pei, Yanling and Qin, Bingchao and Zhao, Li‐Dong},
  title = {Lattice Plainification and Intercalation Advances Power Generation and Thermoelectric Cooling in n‐type Bi 2 (Te, Se) 3},
  journal = {Advanced Energy Materials},
  year = {2025},
  volume = {15},
  number = {18},
  doi = {10.1002/aenm.202404653}
}
Start for free →