EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Surface Engineering of Tin Oxide Nanoparticles by pH Modulation Facilitates Homogeneous Film Formation for Efficient Perovskite Solar Modules

Hyun‐Sung Yun, You‐Hyun Seo, Chae‐Eun Seo, Hyun Seo Kim, Soo Bin Yoo, Bong Joo Kang, Nam Joong Jeon, Eui Hyuk Jung

Advanced Energy Materials · 2024-07 · 14 (25)

DOI: 10.1002/aenm.202400791 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Energy Materials, online erschienen am 25.04.2024. Verfasst von Hyun‐Sung Yun und 7 weiteren Autor:innen. Die Arbeit wurde bisher 26-mal zitiert (Crossref) und nennt 51 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Uniform film deposition over an entire substrate is indispensable to achieve efficient perovskite solar modules (PSMs) by minimizing the gap with high‐performance perovskite solar cells (PSCs). Only a few microscopic pinholes on the film in PSMs directly give rise to debase the performance and stimulate the degradation of the devices. Herein, a strategy of the homogeneous and defect‐reduced electron‐transport layer for high‐performance PSMs is reported. pH modulation of tin oxide (SnO 2 ) nanoparticles colloidal dispersion by a small amount of nitric acid (HNO 3 ) addition leads to the removal of hydroxy groups on the SnO 2 surface acting as electronic defects as well as superb regularity of the thin films by forming a network of the SnO 2 nanoparticles. The surface engineering of SnO 2 nanoparticles brings out the high performance of 23.7% efficiency for a unit cell, 20.3% efficiency for a 24.5 cm 2 minimodule, and 19.0% efficiency for a 214.7 cm 2 submodule, respectively, where all efficiencies are averaged from results obtained by the reverse/forward scan. In outdoor tests with the submodules, a target PSM generates 16.5% higher cumulative electricity for a month as compared to a control PSM. Furthermore, under damp heat environments, the target PSM maintains 80% efficiency compared to an initial efficiency of 1080 h.

Zitieren

APA

Yun, H., Seo, Y., Seo, C., Kim, H. S., Yoo, S. B., Kang, B. J., Jeon, N. J., & Jung, E. H. (2024). Surface Engineering of Tin Oxide Nanoparticles by pH Modulation Facilitates Homogeneous Film Formation for Efficient Perovskite Solar Modules. Advanced Energy Materials, 14(25). https://doi.org/10.1002/aenm.202400791

Vancouver

Yun H, Seo Y, Seo C, Kim HS, Yoo SB, Kang BJ, et al. Surface Engineering of Tin Oxide Nanoparticles by pH Modulation Facilitates Homogeneous Film Formation for Efficient Perovskite Solar Modules. Advanced Energy Materials. 2024;14(25). doi:10.1002/aenm.202400791

BibTeX
@article{Yun2024,
  author = {Yun, Hyun‐Sung and Seo, You‐Hyun and Seo, Chae‐Eun and Kim, Hyun Seo and Yoo, Soo Bin and Kang, Bong Joo and Jeon, Nam Joong and Jung, Eui Hyuk},
  title = {Surface Engineering of Tin Oxide Nanoparticles by pH Modulation Facilitates Homogeneous Film Formation for Efficient Perovskite Solar Modules},
  journal = {Advanced Energy Materials},
  year = {2024},
  volume = {14},
  number = {25},
  doi = {10.1002/aenm.202400791}
}
Kostenlos starten →