EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Synergistic Redox Modulation for High‐Performance Nickel Oxide‐Based Inverted Perovskite Solar Modules

Yan Liu, Bin Ding, Gao Zhang, Xintong Ma, Yao Wang, Xin Zhang, Lirong Zeng, Mohammad Khaja Nazeeruddin, Guanjun Yang, Bo Chen iD

Advanced Science · 2024-06 · 11 (21)

DOI: 10.1002/advs.202309111 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Science, online erschienen am 19.03.2024. Verfasst von Yan Liu und 9 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory for Mechanical Behavior of Materials, Xi'an Jiaotong University, Xi'an, Shaanxi, 710049, P. R. China. Die Arbeit wurde bisher 39-mal zitiert (Crossref) und nennt 51 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key Research and Development Program of China, National Program for Support of Top-notch Young Professionals, National Basic Research Program of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Nickel oxide (NiO x )‐based inverted perovskite solar cells stand as promising candidates for advancing perovskite photovoltaics towards commercialization, leveraging their remarkable stability, scalability, and cost‐effectiveness. However, the interfacial redox reaction between high‐valence Ni 4+ and perovskite, alongside the facile conversion of iodide in perovskite into I 2 , significantly deteriorates the performance and reproducibility of NiO x ‐based perovskite photovoltaics. Here, potassium borohydride (KBH 4 ) is introduced as a dual‐action reductant, which effectively avoids the Ni 4+ /perovskite interface reaction and mitigates the iodide‐to‐I 2 oxidation within perovskite film. This synergistic redox modulation significantly suppresses nonradiative recombination and increases the carrier lifetime. As a result, an impressive power conversion efficiency of 24.17% for NiO x ‐based perovskite solar cells is achieved, and a record efficiency of 20.2% for NiO x ‐based perovskite solar modules fabricated under ambient conditions. Notably, when evaluated using the ISOS‐L‐2 standard protocol, the module retains 94% of its initial efficiency after 2000 h of continuous illumination under maximum power point at 65 °C in ambient air.

Schlagwörter

Stichwörter der Autor:innen

interface reactionnickel oxideperovskite solar modulesredox modulationsynergistic

Autor:innen und Institutionen

  • State Key Laboratory for Mechanical Behavior of Materials, Xi'an Jiaotong University, Xi'an, Shaanxi, 710049, P. R. China.
  • Group for Molecular Engineering of Functional Materials, Institute of Chemical Sciences and Engineering, EPFL VALAIS, Sion, 1950, Switzerland.

ORCID-Profile: Bo Chen

Förderung

  • National Key Research and Development Program of China
  • National Program for Support of Top-notch Young Professionals
  • National Basic Research Program of China

Zitieren

APA

Liu, Y., Ding, B., Zhang, G., Ma, X., Wang, Y., Zhang, X., Zeng, L., Nazeeruddin, M. K., Yang, G., & Chen, B. (2024). Synergistic Redox Modulation for High‐Performance Nickel Oxide‐Based Inverted Perovskite Solar Modules. Advanced Science, 11(21). https://doi.org/10.1002/advs.202309111

Vancouver

Liu Y, Ding B, Zhang G, Ma X, Wang Y, Zhang X, et al. Synergistic Redox Modulation for High‐Performance Nickel Oxide‐Based Inverted Perovskite Solar Modules. Advanced Science. 2024;11(21). doi:10.1002/advs.202309111

BibTeX
@article{Liu2024,
  author = {Liu, Yan and Ding, Bin and Zhang, Gao and Ma, Xintong and Wang, Yao and Zhang, Xin and Zeng, Lirong and Nazeeruddin, Mohammad Khaja and Yang, Guanjun and Chen, Bo},
  title = {Synergistic Redox Modulation for High‐Performance Nickel Oxide‐Based Inverted Perovskite Solar Modules},
  journal = {Advanced Science},
  year = {2024},
  volume = {11},
  number = {21},
  doi = {10.1002/advs.202309111}
}
Kostenlos starten →