Rear Surface Passivation for Ink‐Based, Submicron CuIn(S, Se) 2 Solar Cells
Advanced Energy Materials · 2024-03 · 14 (10)
DOI: 10.1002/aenm.202303309 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Energy Materials, online erschienen am 04.01.2024. Verfasst von Sunil Suresh und 7 weiteren Autor:innen. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: Horizon 2020 Framework Programme, Natural Sciences and Engineering Research Council of Canada, Science and Engineering Research Board.
Abstract (Originalsprache)
A N , N ‐dimethylformamide and thiourea‐based route is developed to fabricate submicron (0.55 and 0.75 µm) thick CuIn(S,Se) 2 (CISSe) thin films for photovoltaic applications, addressing challenges of material usage, throughput, and manufacturing costs. However, reducing the absorber film thickness below 1 µm in a regular CISSe solar cell decreases the device efficiency due to losses at the highly‐recombinative, and mediocre‐reflective Mo/CISSe rear interface. For the first time, to mitigate the rear recombination losses, a novel rear contacting structure involving a surface passivation layer and point contact openings is developed for solution processed CISSe films and demonstrated in tangible devices. An atomic layer deposited Al 2 O 3 film is employed to passivate the Mo/CISSe rear surface while precipitates formed via chemical bath deposition of CdS are used to generate nanosized point openings. Consequently, Al 2 O 3 passivated CISSe solar cells show an increase in the open‐circuit voltage (V OC ) and short‐circuit current density when compared to reference cells with equivalent absorber thicknesses. Notably, a V OC increase of 59 mV contributes to active area efficiencies of 14.2% for rear passivated devices with 0.75 µm thick absorber layers, the highest reported value for submicron‐based solution processed, low bandgap CISSe solar cells.
Förderung
- Horizon 2020 Framework Programme
- Natural Sciences and Engineering Research Council of Canada
- Science and Engineering Research Board
Zitieren
APA
Suresh, S., Gidey, A. T., Chowdhury, T. H., Rondiya, S. R., Tao, L., Liu, J., Vermang, B., & Uhl, A. R. (2024). Rear Surface Passivation for Ink‐Based, Submicron CuIn(S, Se) 2 Solar Cells. Advanced Energy Materials, 14(10). https://doi.org/10.1002/aenm.202303309
Vancouver
Suresh S, Gidey AT, Chowdhury TH, Rondiya SR, Tao L, Liu J, et al. Rear Surface Passivation for Ink‐Based, Submicron CuIn(S, Se) 2 Solar Cells. Advanced Energy Materials. 2024;14(10). doi:10.1002/aenm.202303309
BibTeX
@article{Suresh2024,
author = {Suresh, Sunil and Gidey, Abraha T. and Chowdhury, Towhid H. and Rondiya, Sachin R. and Tao, Li and Liu, Jian and Vermang, Bart and Uhl, Alexander R.},
title = {Rear Surface Passivation for Ink‐Based, Submicron CuIn(S, Se) 2 Solar Cells},
journal = {Advanced Energy Materials},
year = {2024},
volume = {14},
number = {10},
doi = {10.1002/aenm.202303309}
}
EUVIMED