Ink Design Enabling Slot‐Die Coated Perovskite Solar Cells with >22% Power Conversion Efficiency, Micro‐Modules, and 1 Year of Outdoor Performance Evaluation
Advanced Energy Materials · 2023-09 · 13 (33)
DOI: 10.1002/aenm.202203898 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Energy Materials, online erschienen am 04.03.2023. Verfasst von Jinzhao Li und 24 weiteren Autor:innen. Die Arbeit wurde bisher 144-mal zitiert (Crossref) und nennt 54 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Helmholtz Energy Materials Foundry, Helmholtz Association.
Abstract (Originalsprache)
The next technological step in the exploration of metal‐halide perovskite solar cells is the demonstration of larger‐area device prototypes under outdoor operating conditions. The authors here demonstrate that when slot‐die coating the halide perovskite layers on large areas, ribbing effects may occur but can be prevented by adjusting the precursor ink's rheological properties. For formamidinium lead triiodide (FAPbI 3 ) precursor inks based on 2‐methoxyethanol, the ink viscosity is adjusted by adding acetonitrile (ACN) as a co‐solvent leading to smooth FAPbI 3 thin‐films with high quality and layer homogeneity. For an optimized content of 46 vol% of the ACN co‐solvent, a certified steady‐state performance of 22.3% is achieved in p‐i‐n FAPbI 3 ‐perovskite solar cells. Scaling devices to larger areas by making laser series‐interconnected mini‐modules of 12.7 cm 2 , a power conversion efficiency of 17.1% is demonstrated. A full year of outdoor stability testing with continuous maximum power point tracking on encapsulated devices is performed and it is demonstrated that these devices maintain close to 100% of their initial performance during winter and spring followed by a significant performance decline during warmer summer months. This work highlights the importance of the real‐condition evaluation of larger area device prototypes to validate the technological potential of halide perovskite photovoltaics.
Förderung
- Helmholtz Energy Materials Foundry
- Helmholtz Association
Zitieren
APA
Li, J., Dagar, J., Shargaieva, O., Maus, O., Remec, M., Emery, Q., Khenkin, M., Ulbrich, C., Akhundova, F., Márquez, J. A., Unold, T., Fenske, M., Schultz, C., Stegemann, B., Al‐Ashouri, A., Albrecht, S., Esteves, A. T., Korte, L., Köbler, H., …, & Unger, E. (2023). Ink Design Enabling Slot‐Die Coated Perovskite Solar Cells with >22% Power Conversion Efficiency, Micro‐Modules, and 1 Year of Outdoor Performance Evaluation. Advanced Energy Materials, 13(33). https://doi.org/10.1002/aenm.202203898
Vancouver
Li J, Dagar J, Shargaieva O, Maus O, Remec M, Emery Q, et al. Ink Design Enabling Slot‐Die Coated Perovskite Solar Cells with >22% Power Conversion Efficiency, Micro‐Modules, and 1 Year of Outdoor Performance Evaluation. Advanced Energy Materials. 2023;13(33). doi:10.1002/aenm.202203898
BibTeX
@article{Li2023,
author = {Li, Jinzhao and Dagar, Janardan and Shargaieva, Oleksandra and Maus, Oliver and Remec, Marco and Emery, Quiterie and Khenkin, Mark and Ulbrich, Carolin and Akhundova, Fatima and Márquez, José A. and Unold, Thomas and Fenske, Markus and Schultz, Christof and Stegemann, Bert and Al‐Ashouri, Amran and Albrecht, Steve and Esteves, Alvaro Tejada and Korte, Lars and Köbler, Hans and Abate, Antonio and Többens, Daniel M. and Zizak, Ivo and List‐Kratochvil, Emil J. W. and Schlatmann, Rutger and Unger, Eva},
title = {Ink Design Enabling Slot‐Die Coated Perovskite Solar Cells with >22% Power Conversion Efficiency, Micro‐Modules, and 1 Year of Outdoor Performance Evaluation},
journal = {Advanced Energy Materials},
year = {2023},
volume = {13},
number = {33},
doi = {10.1002/aenm.202203898}
}
EUVIMED