EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Stabilizing Solution–Substrate Interaction of Perovskite Ink on PEDOT:PSS for Scalable Blade Coated Narrow Bandgap Perovskite Solar Modules by Gas Quenching

Severin Siegrist, Johnpaul Kurisinkal Pious, Huagui Lai, Radha Krishnan Kothandaraman, Jincheng Luo, Vitor Vlnieska, Ayodhya Nath Tiwari, Fan Fu

Solar RRL · 2024-08 · 8 (15)

DOI: 10.1002/solr.202400447 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Solar RRL, online erschienen am 15.07.2024. Verfasst von Severin Siegrist und 7 weiteren Autor:innen. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 60 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0). Gefördert von: Horizon 2020, Schweizerischer Nationalfonds zur Förderung der Wissenschaftlichen Forschung, Bundesamt für Energie.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The development of scalable 1.25 eV mixed Pb–Sn perovskite solar modules by blade coating lags behind Pb‐based perovskites due to limited understanding of solution–substrate interaction of the perovskite ink on PEDOT:PSS and subsequent gas quenching. To address this challenge, the wet film deposition and quenching process to better understand narrow bandgap perovskite film formation on PEDOT:PSS are studied. It is found that the wetting of Pb–Sn perovskite ink on PEDOT:PSS is highly unstable over relevant coating time scales, causing the contact angles to decrease rapidly from 42° to 16° within seconds. This instability leads to localized irregularities in the wet film, resulting in uneven solvent extraction and inhomogeneous nuclei density. As a result, rough perovskite films with voids at the buried interface are obtained. To overcome this problem, a quasistatic wetting process by reducing the blade coating speed is developed, thereby stabilizing the wetting behavior of Pb–Sn perovskite precursor ink on PEDOT:PSS. This optimized process facilitates the deposition of high‐quality, void‐free Pb–Sn perovskite films with uniform thickness over 8 cm of coating length using moderate (1.4 bar) N 2 quenching. 20% efficient narrow bandgap perovskite solar cells and minimodules with 15.8% active area efficiency on 15.9 cm 2 are achieved.

Förderung

  • Horizon 2020
  • Schweizerischer Nationalfonds zur Förderung der Wissenschaftlichen Forschung
  • Bundesamt für Energie

Zitieren

APA

Siegrist, S., Pious, J. K., Lai, H., Kothandaraman, R. K., Luo, J., Vlnieska, V., Tiwari, A. N., & Fu, F. (2024). Stabilizing Solution–Substrate Interaction of Perovskite Ink on PEDOT:PSS for Scalable Blade Coated Narrow Bandgap Perovskite Solar Modules by Gas Quenching. Solar RRL, 8(15). https://doi.org/10.1002/solr.202400447

Vancouver

Siegrist S, Pious JK, Lai H, Kothandaraman RK, Luo J, Vlnieska V, et al. Stabilizing Solution–Substrate Interaction of Perovskite Ink on PEDOT:PSS for Scalable Blade Coated Narrow Bandgap Perovskite Solar Modules by Gas Quenching. Solar RRL. 2024;8(15). doi:10.1002/solr.202400447

BibTeX
@article{Siegrist2024,
  author = {Siegrist, Severin and Pious, Johnpaul Kurisinkal and Lai, Huagui and Kothandaraman, Radha Krishnan and Luo, Jincheng and Vlnieska, Vitor and Tiwari, Ayodhya Nath and Fu, Fan},
  title = {Stabilizing Solution–Substrate Interaction of Perovskite Ink on PEDOT:PSS for Scalable Blade Coated Narrow Bandgap Perovskite Solar Modules by Gas Quenching},
  journal = {Solar RRL},
  year = {2024},
  volume = {8},
  number = {15},
  doi = {10.1002/solr.202400447}
}
Kostenlos starten →