EUVIMEDObjevte EUVIMED
Open access · CC BY 4.0

Ultra‐Wide Temperature‐Stable High Piezoelectricity in Textured CaBi 2 Nb 2 O 9 Ceramics via Defect‐enhanced Asymmetric Jahn‐Teller Distortion

Xiaogang Luo, Xuefan Zhou iD, Yan Zhang iD, Hang Luo iD, Xi Yuan, Dou Zhang iD

Advanced Science · 2026-11-15

DOI: 10.1002/advs.78801 ↗

At a glance

Journal article in Advanced Science, published online on 2026-11-15. Written by Xiaogang Luo and 5 co-authors. Institution: College of Chemistry and Chemical Engineering, Central South University, Changsha, Hunan, China. 52 references. The full text is freely available (open access, CC BY 4.0). Funded by: Changsha Science and Technology Project, Fundamental and Interdisciplinary Disciplines Breakthrough Plan of the Ministry of Education of China, Scientific Research Project of the Hunan Provincial-Department of Education.

AbstraktSubjectsBibliografické údajeCiteRelated studies

Abstract (original language)

CaBi 2 Nb 2 O 9 is regarded as an eminently promising candidate for high‐temperature piezoelectric devices due to its ultra‐high Curie temperature and good insulation. Unfortunately, extremely low piezoelectric properties and poor temperature stability severely hinder its practical application. In this work, the CuO doping strengthens the structural rigidity of the octahedral network against temperature by coupling the Jahn‐Teller effect of Cu 2+ with defect dipoles to form a defect‐enhanced Jahn‐Teller distortion, combined with the modulation of the polarization to the poling electric field direction via textural engineering, significant improvement of both piezoelectric response and temperature stability can be realized simultaneously. As a result, the sample with 0.1 wt.% CuO not only maintains an ultra‐high Curie temperature ( T C ∼ 958°C) but also exhibits a d 33 value of ∼27 pC/N and a low high‐temperature (600°C) dielectric loss of 0.028. Simultaneously, its piezoelectric properties demonstrated excellent temperature stability by in‐situ heating up to 600°C (Δ d 33 ∼4.96%) as well as undergoing 10 cycles of high‐low temperature cycling tests (RT‐750°C‐RT, enduring approximately 240 h). This work represents a breakthrough for the practical application of high‐temperature piezoelectric ceramics.

Subjects

Author keywords

CuO dopingJahn‐Teller effectPiezoelectricityTexture (crystalline)Thermal stability

Authors and institutions

  • College of Chemistry and Chemical Engineering, Central South University, Changsha, Hunan, China.
  • Powder Metallurgy Research Institute, State Key Laboratory of Powder Metallurgy, Central South University, Changsha, Hunan, China.

ORCID profiles: Xuefan Zhou, Yan Zhang, Hang Luo, Dou Zhang

Funding

  • Changsha Science and Technology Project
  • Fundamental and Interdisciplinary Disciplines Breakthrough Plan of the Ministry of Education of China
  • Scientific Research Project of the Hunan Provincial-Department of Education
  • National Natural Science Foundation of China
  • High Performance Computing Center of Central South University
  • State Key Laboratory of Powder Metallurgy, China

Cite

APA

Luo, X., Zhou, X., Zhang, Y., Luo, H., Yuan, X., & Zhang, D. (2026). Ultra‐Wide Temperature‐Stable High Piezoelectricity in Textured CaBi 2 Nb 2 O 9 Ceramics via Defect‐enhanced Asymmetric Jahn‐Teller Distortion. Advanced Science. https://doi.org/10.1002/advs.78801

Vancouver

Luo X, Zhou X, Zhang Y, Luo H, Yuan X, Zhang D. Ultra‐Wide Temperature‐Stable High Piezoelectricity in Textured CaBi 2 Nb 2 O 9 Ceramics via Defect‐enhanced Asymmetric Jahn‐Teller Distortion. Advanced Science. 2026. doi:10.1002/advs.78801

BibTeX
@article{Luo2026,
  author = {Luo, Xiaogang and Zhou, Xuefan and Zhang, Yan and Luo, Hang and Yuan, Xi and Zhang, Dou},
  title = {Ultra‐Wide Temperature‐Stable High Piezoelectricity in Textured CaBi 2 Nb 2 O 9 Ceramics via Defect‐enhanced Asymmetric Jahn‐Teller Distortion},
  journal = {Advanced Science},
  year = {2026},
  doi = {10.1002/advs.78801}
}
Start for free →