Deterministic Noncontact Release and Transfer Through Programmable Interfacial Stress Reconfiguration
Advanced Science · 2026-11-15
DOI: 10.1002/advs.78781 ↗At a glance
Journal article in Advanced Science, published online on 2026-11-15. Written by Gui Won Hwang and 8 co-authors. Institution: School of Chemical Engineering, Sungkyunkwan University (SKKU), Suwon, Gyeonggi-do, Republic of Korea. 49 references. The full text is freely available (open access, CC BY 4.0). Funded by: National Research Foundation of Korea, Market-led K-sensor technology program.
Abstract (original language)
Deterministic placement of fragile microcomponents is a central challenge in advanced electronic manufacturing, including chiplet integration and micro‐LED assembly. Most switchable adhesives rely on contact‐mediated detachment, which concentrates stress at the perimeter and causes slip and misalignment. Here, we report a diving beetle‐inspired electroactive switchable adhesive (DESA) that achieves deterministic transfer through vibration‐driven noncontact release enabled by interfacial stress reconfiguration. A perforated electrode couples a bioinspired adhesive layer to an electroactive PVC gel actuator, defining electrically contracting electrode‐contact regions and mechanically linked gel‐continuous hole regions. Under actuation, differential displacement between these regions deforms the adhesive layer and promotes partial peel‐off at distributed interior sites rather than along a single perimeter front. At the 269 Hz resonance, vibration amplifies the displacement mismatch and spreads peel‐off across the contact area, progressively reducing the load‐bearing area. The resulting inertial stress completes noncontact separation, suppressing misalignment. The adhesive layer provides > 20 kPa dry and > 42 kPa wet adhesion across diverse substrates and retains stable performance over 1000 attachment–detachment cycles. On a robotic platform, the device transfers microcomponents with a lateral placement error of 318 ± 155 µm (≈99.5% placement accuracy). This interfacial stress reconfiguration offers a route to deterministic placement beyond adhesion‐strength control.
Subjects
Author keywords
Authors and institutions
- School of Chemical Engineering, Sungkyunkwan University (SKKU), Suwon, Gyeonggi-do, Republic of Korea.
- Department of Mechanical Engineering, Konkuk University, Seoul, Republic of Korea.
- Samsung Advanced Institute for Health Sciences and Technology (SAIHST), Sungkyunkwan University, Suwon, Gyeonggi-do, Republic of Korea.
ORCID profiles: Gui Won Hwang, Jinhyung Kim, Changrok Park, Jihun Son, Tae-Heon Yang, Changhyun Pang
Funding
- National Research Foundation of Korea
- Market-led K-sensor technology program
Cite
APA
Hwang, G. W., Kim, J., Song, J. H., Park, C., Son, J., Kang, G. R., Park, J., Yang, T. H., & Pang, C. (2026). Deterministic Noncontact Release and Transfer Through Programmable Interfacial Stress Reconfiguration. Advanced Science. https://doi.org/10.1002/advs.78781
Vancouver
Hwang GW, Kim J, Song JH, Park C, Son J, Kang GR, et al. Deterministic Noncontact Release and Transfer Through Programmable Interfacial Stress Reconfiguration. Advanced Science. 2026. doi:10.1002/advs.78781
BibTeX
@article{Hwang2026,
author = {Hwang, Gui Won and Kim, Jinhyung and Song, Jin Ho and Park, Changrok and Son, Jihun and Kang, Gyun Ro and Park, Jaeha and Yang, Tae-Heon and Pang, Changhyun},
title = {Deterministic Noncontact Release and Transfer Through Programmable Interfacial Stress Reconfiguration},
journal = {Advanced Science},
year = {2026},
doi = {10.1002/advs.78781}
}
EUVIMED