EUVIMEDSkopri EUVIMED
Open access · CC BY 4.0

µSlicer for Programmable Multimaterial 3D Printing

Daniel H Meile iD, Berin Šeta, Md Tusher Mollah iD, Yohan Jacquet iD, Rob Wolfs iD, Jon Spangenberg iD

Advanced Science · 2026-10-25

DOI: 10.1002/advs.78364 ↗

At a glance

Journal article in Advanced Science, published online on 2026-10-25. Written by Daniel H Meile and 5 co-authors. Institution: Department of Civil and Mechanical Engineering, Technical University of Denmark, Lyngby, Denmark. 32 references. The full text is freely available (open access, CC BY 4.0). Funded by: Innovation Fund Denmark, Independent Research Fund Denmark, Innovationsfonden.

AstrattSubjectsDettalji biblijografiċiCiteRelated studies

Abstract (original language)

Nature rarely builds with uniform materials; instead, it achieves exceptional performance by arranging composition and structure across multiple length scales. Mimicking such architectures has become increasingly feasible with additive manufacturing, and especially with multimaterial 3D printing, where complex structures with spatially varying material composition can be fabricated. However, although 3D printing is widely recognized as a digital manufacturing method, multimaterial 3D printing remains only partially digitalized and still relies heavily on trial‐and‐error experimentation to identify printing strategies that produce the desired microstructures. To address this, we present the µSlicer that enables digital programming of internal multimaterial microstructures within individual printed strands. The µSlicer combines a numerical physics framework with an automatic signal generation module, allowing target microstructures to be translated into deposition signals for multimaterial extrusion. This approach fundamentally transforms slicing from purely geometric toolpath generation to microstructure programming, providing a route toward bioinspired, multifunctional, and digitally designed material architectures in extrusion‐based additive manufacturing.

Subjects

Author keywords

3D printingcomputational fluid dynamicsmicrostructure programmingraytracing

Authors and institutions

  • Department of Civil and Mechanical Engineering, Technical University of Denmark, Lyngby, Denmark.
  • Department of the Built Environment, Eindhoven University of Technology, Eindhoven, The Netherlands.

ORCID profiles: Daniel H Meile, Md Tusher Mollah, Yohan Jacquet, Rob Wolfs, Jon Spangenberg

Funding

  • Innovation Fund Denmark
  • Independent Research Fund Denmark
  • Innovationsfonden
  • Danmarks Frie Forskningsfond

Cite

APA

Meile, D. H., Šeta, B., Mollah, M. T., Jacquet, Y., Wolfs, R., & Spangenberg, J. (2026). µSlicer for Programmable Multimaterial 3D Printing. Advanced Science. https://doi.org/10.1002/advs.78364

Vancouver

Meile DH, Šeta B, Mollah MT, Jacquet Y, Wolfs R, Spangenberg J. µSlicer for Programmable Multimaterial 3D Printing. Advanced Science. 2026. doi:10.1002/advs.78364

BibTeX
@article{Meile2026,
  author = {Meile, Daniel H and Šeta, Berin and Mollah, Md Tusher and Jacquet, Yohan and Wolfs, Rob and Spangenberg, Jon},
  title = {µSlicer for Programmable Multimaterial 3D Printing},
  journal = {Advanced Science},
  year = {2026},
  doi = {10.1002/advs.78364}
}
Start for free →