Field Emission Enhancement in Graphene/Cu Cathodes Through Laser‐Shock‐Induced Modulation of Geometry and Work Function
Advanced Science · 2026-11-10
DOI: 10.1002/advs.78333 ↗At a glance
Journal article in Advanced Science, published online on 2026-11-10. Written by Ximei Xu and 6 co-authors. Institution: State Key Laboratory of Clean and Efficient Turbomachinery Power Equipment, Department of Mechanical Engineering, Tsinghua University, Beijing, China. 57 references. The full text is freely available (open access, CC BY 4.0). Funded by: National Science and Technology Major Project, Joint project between Dongfang Electric Corporation Dongfang Turbine Co., Ltd. and State Key Laboratory of Clean and Efficient Turbomachinery Power Equipment,….
Abstract (original language)
Cold cathodes enable compact, low‐power vacuum microelectronics with rapid activation. Graphene/metal cathodes offer a flexible, conductive platform, but efficient field emission requires local field concentration to coincide with reduced tunneling barriers while avoiding transfer contamination. Laser shock microforming converts graphene/Cu foils into flexible cathodes in one step without transfer while modulating the local work function. High‐curvature protrusions and gradients in graphene disorder, strain, Cu microstructure, surface chemistry, and graphene/Cu coupling create spatial variations in the local emission barrier. In individual monolayer graphene/Cu protrusions, these changes produce local work function contrasts reaching 0.12 eV and align lower barriers with highly curved regions. This spatial alignment enhances field emission, yielding a turn‐on field of 4.9 V µm −1 , an emission current density of 2.2 mA cm −2 , stable emission over 32 h, and durability after 3000 bending cycles. This work extends laser shock processing from geometric shaping to coupled structural and electronic barrier control in graphene/metal cold cathodes, providing a route that can be scaled over large areas for flexible vacuum electronics.
Subjects
Author keywords
Authors and institutions
- State Key Laboratory of Clean and Efficient Turbomachinery Power Equipment, Department of Mechanical Engineering, Tsinghua University, Beijing, China.
- Beijing Key Laboratory of Atomic-Scale Precision Manufacturing and Cross-Scale Device Fabrication, Department of Mechanical Engineering, Tsinghua University, Beijing, China.
- Key Laboratory For Advanced Materials Processing Technology, Ministry of Education, Beijing, China.
ORCID profiles: Ximei Xu
Funding
- National Science and Technology Major Project
- Joint project between Dongfang Electric Corporation Dongfang Turbine Co., Ltd. and State Key Laboratory of Clean and Efficient Turbomachinery Power Equipment,…
Cite
APA
Xu, X., Tao, H., Li, W., Li, X., Lin, J., Yang, M., & Zhou, M. (2026). Field Emission Enhancement in Graphene/Cu Cathodes Through Laser‐Shock‐Induced Modulation of Geometry and Work Function. Advanced Science. https://doi.org/10.1002/advs.78333
Vancouver
Xu X, Tao H, Li W, Li X, Lin J, Yang M, et al. Field Emission Enhancement in Graphene/Cu Cathodes Through Laser‐Shock‐Induced Modulation of Geometry and Work Function. Advanced Science. 2026. doi:10.1002/advs.78333
BibTeX
@article{Xu2026,
author = {Xu, Ximei and Tao, Haonan and Li, Wenming and Li, Xuyin and Lin, Jiacong and Yang, Mingyang and Zhou, Ming},
title = {Field Emission Enhancement in Graphene/Cu Cathodes Through Laser‐Shock‐Induced Modulation of Geometry and Work Function},
journal = {Advanced Science},
year = {2026},
doi = {10.1002/advs.78333}
}
EUVIMED