EUVIMEDSkopri EUVIMED
Open access · CC BY 4.0

A Monolithic Janus Hydrogel Pressure Sensor for Wearable Motion and Physiological Monitoring

Syed Atif Ali iD, Zeeshan Alam Ansari, Reynaldo Carlos Kuizon Montalbo, Hailemichael Ayalew iD, Yu-Sheng Hsiao iD, Chih-Wei Chu, Hsiao-Hua Yu, Hsiung-Lin Tu iD

Advanced Science · 2026-07-30

DOI: 10.1002/advs.76893 ↗

At a glance

Journal article in Advanced Science, published online on 2026-07-30. Written by Syed Atif Ali and 7 co-authors. Institution: Institute of Chemistry, Academia Sinica, Taipei, Taiwan. 53 references. The full text is freely available (open access, CC BY 4.0). Funded by: National Science and Technology Council in Taiwan.

AstrattSubjectsDettalji biblijografiċiCiteRelated studies

Abstract (original language)

Sensitive pressure sensors with easy fabrication and stable performance are essential for next‐generation wearable electronics. Here, we report a monolithic Janus hydrogel‐based capacitive pressure sensor composed of two conductive layers and an intervening dielectric layer, forming an all‐hydrogel sensing architecture. The conductive layers are fabricated from poly(3,4‐ethylenedioxythiophene) (PEDOT) incorporated poly(ethylene glycol) diacrylate (PEGDA) hydrogels, while the dielectric layer consists of a pristine PEGDA matrix, enabling intimate interfacial bonding without the need for additional adhesives. The mechanical properties of the hydrogel system reveal tunable swelling behavior and elastic modulus as a function of PEGDA concentration. The resulting sensor displays a sensitivity of 0.27 kPa −1 in the pressure range of 0.49 to 3.43 kPa, and the operating range could extend upto 5.39 kPa. Additionally, the sensor exhibits stable electromechanical performance, featuring a short response time of 23 ms for the rising edge and 36 ms for the falling edge, allowing it to detect the pressure applied under repeated stimuli. Owing to its flexible nature, the designed sensor demonstrates reliable detection of a wide range of mechanical stimuli, from small physiological signals to human motions. Our results highlight that the Janus hydrogel with integrated conductive and dielectric layers could be a promising platform for wearable health monitoring.

Subjects

Author keywords

capacitive pressure sensorconductive polymerjanus hydrogelwearable bioelectronics

Authors and institutions

  • Institute of Chemistry, Academia Sinica, Taipei, Taiwan.
  • Department of Physics, National Taiwan University, Taipei, Taiwan.
  • Nano-Science and Technology Program, Taiwan International Graduate Program, Academia Sinica, Taipei, Taiwan.
  • Research Center for Applied Sciences, Academia Sinica, Taipei, Taiwan.
  • Smart Organic Materials Laboratory, Institute of Chemistry, Academia Sinica, Taipei, Taiwan.
  • Department of Materials Science and Engineering, National Taiwan University of Science and Technology, Taipei, Taiwan.

ORCID profiles: Syed Atif Ali, Hailemichael Ayalew, Yu-Sheng Hsiao, Hsiung-Lin Tu

Funding

  • National Science and Technology Council in Taiwan

Cite

APA

Ali, S. A., Ansari, Z. A., Montalbo, R. C. K., Ayalew, H., Hsiao, Y. S., Chu, C. W., Yu, H. H., & Tu, H. L. (2026). A Monolithic Janus Hydrogel Pressure Sensor for Wearable Motion and Physiological Monitoring. Advanced Science. https://doi.org/10.1002/advs.76893

Vancouver

Ali SA, Ansari ZA, Montalbo RCK, Ayalew H, Hsiao YS, Chu CW, et al. A Monolithic Janus Hydrogel Pressure Sensor for Wearable Motion and Physiological Monitoring. Advanced Science. 2026. doi:10.1002/advs.76893

BibTeX
@article{Ali2026,
  author = {Ali, Syed Atif and Ansari, Zeeshan Alam and Montalbo, Reynaldo Carlos Kuizon and Ayalew, Hailemichael and Hsiao, Yu-Sheng and Chu, Chih-Wei and Yu, Hsiao-Hua and Tu, Hsiung-Lin},
  title = {A Monolithic Janus Hydrogel Pressure Sensor for Wearable Motion and Physiological Monitoring},
  journal = {Advanced Science},
  year = {2026},
  doi = {10.1002/advs.76893}
}
Start for free →