A Modular Standard Operating Procedure for Standardizing Lithium Metal Interfaces
Advanced Science · 2026-10 · 13 (56)
DOI: 10.1002/advs.76595 ↗At a glance
Journal article in Advanced Science, published online on 2026-07-15. Written by Wen-Hsin Chang and 7 co-authors. Institution: International College of Semiconductor Technology, National Yang Ming Chiao Tung University, Hsinchu, Taiwan. Cited 1 times so far (Crossref); 45 references. The full text is freely available (open access, CC BY 4.0). Funded by: National Science and Technology Council (NSTC) of Taiwan, Ministry of Education (MOE) of Taiwan.
Abstract (original language)
Lithium metal is a promising material for high‐energy‐density batteries, yet its electrochemical behavior is strongly influenced by the poorly controlled initial surface state of commercial lithium foils. Variations arising from manufacturing, storage, and handling introduce interfacial heterogeneity, leading to performance scatter and limited reproducibility across studies. Herein, we establish a modular standard operating procedure (SOP) to systematically regulate lithium metal interfaces prior to testing. The SOP decomposes lithium pretreatment into three functionally distinct steps: chemical etching (E) to remove native surface layers, mechanical brushing (B) to homogenize surface geometry, and solution soaking (S) to induce a controlled artificial solid electrolyte interphase. Using symmetric Li||Li cells, the integrated E–B–S sequence exhibits improved voltage stability and suppressed interfacial resistance growth compared with partial or no treatments. Structural and interfacial analyses using SEM, lithium‐sensitive EDX, AFM, and EIS reveal the formation of a three‐dimensionally structured yet chemically uniform lithium surface. Density functional theory calculations and depth‐resolved XPS further clarify the chemical origins of controlled etching and interphase formation. The standardized lithium interface is validated in Li||LiFePO 4 full cells, demonstrating enhanced capacity retention, reduced polarization, and improved rate capability. This work provides a transferable and reproducible framework for lithium metal interface standardization.
Subjects
Author keywords
Authors and institutions
- International College of Semiconductor Technology, National Yang Ming Chiao Tung University, Hsinchu, Taiwan.
- Department of Materials Science and Engineering, National Tsing Hua University, Hsinchu, Taiwan.
- Department of Chemistry, National Taiwan Normal University, Taipei, Taiwan.
- Industry Academia Innovation School, National Yang Ming Chiao Tung University, Hsinchu, Taiwan.
ORCID profiles: Yu-Sheng Su
Funding
- National Science and Technology Council (NSTC) of Taiwan
- Ministry of Education (MOE) of Taiwan
Cite
APA
Chang, W. H., Shaju, A., Lin, H. S., Hsu, S. L., Dinh, Q. H., Yeh, C. N., Li, E. Y., & Su, Y. S. (2026). A Modular Standard Operating Procedure for Standardizing Lithium Metal Interfaces. Advanced Science, 13(56). https://doi.org/10.1002/advs.76595
Vancouver
Chang WH, Shaju A, Lin HS, Hsu SL, Dinh QH, Yeh CN, et al. A Modular Standard Operating Procedure for Standardizing Lithium Metal Interfaces. Advanced Science. 2026;13(56). doi:10.1002/advs.76595
BibTeX
@article{Chang2026,
author = {Chang, Wen-Hsin and Shaju, Anlin and Lin, Han-Shiuan and Hsu, Sih-Ling and Dinh, Quang Huy and Yeh, Che-Ning and Li, Elise Yu-Tzu and Su, Yu-Sheng},
title = {A Modular Standard Operating Procedure for Standardizing Lithium Metal Interfaces},
journal = {Advanced Science},
year = {2026},
volume = {13},
number = {56},
doi = {10.1002/advs.76595}
}
EUVIMED