EUVIMEDAtklāt EUVIMED
Open access · CC BY 4.0

Drop‐Shaped Optical Microfiber Enabled Biomechanical Sensor

Yan Xu, Xitao Tu, Haochen Jiang, Jun Mo, Xinyue Zhang, Xiaomin Yue iD, Limin Tong, Lei Zhang iD

Advanced Science · 2026-08 · 13 (44)

DOI: 10.1002/advs.75673 ↗

At a glance

Journal article in Advanced Science, published online on 2026-05-14. Written by Yan Xu and 7 co-authors. Institution: State Key Laboratory of Extreme Photonics and Instrumentation, College of Optical Science and Engineering, Zhejiang University, Hangzhou, China. Major MEDLINE topics: Biosensing Techniques. 56 references. The full text is freely available (open access, CC BY 4.0). Funded by: National Natural Science Foundation of China, New Cornerstone Science Foundation, Fundamental and Interdisciplinary Disciplines Breakthrough Plan of the Ministry of Education of China.

AbstraktsSubjectsBibliogrāfiskie datiCiteRelated studies

Abstract (original language)

Microforce sensing plays a pivotal role in biomechanics. However, existing microforce sensors face limitations in conducting biomechanical sensing on living organisms due to cumbersome operational procedures and limited measurement flexibility. To overcome this challenge, we developed a microforce sensor using a drop‐shaped optical microfiber. Leveraging its small bending radius and the bending‐radius‐dependent output light intensity, the microforce sensor features a small footprint, a low spring constant, and enables nanonewton‐level force sensing by monitoring variations in output light intensity. To prevent contact induced surface contamination, a PDMS microsphere is integrated at the sensor tip to isolate the waveguide evanescent field and boost microforce detection sensitivity. The sensor exhibits a force resolution of 24 nN in the range of 0–10 µN. As proof‐of‐concept demonstrations, Young's modulus characterization of onion epidermal cells and Caenorhabditis elegans are realized. The sensor demonstrated here is promising to offer a precise, flexible, and reliable solution for biomechanical characterization and is configurable to cater to a broad spectrum of applications.

Subjects

MeSH terms (MEDLINE)

Biosensing TechniquesAnimalsBiomechanical PhenomenaCaenorhabditis elegansElastic ModulusEquipment DesignOnions

Author keywords

C. elegansYoung's modulusbiomechanicsmicroforce sensoroptical microfibersingle cell

Authors and institutions

  • State Key Laboratory of Extreme Photonics and Instrumentation, College of Optical Science and Engineering, Zhejiang University, Hangzhou, China.
  • Department of Biophysics and Department of Neurosurgery of the Fourth Affiliated Hospital, Zhejiang University School of Medicine, Hangzhou, China.
  • Department of Neurosurgery, The Fourth Affiliated Hospital of School of Medicine, and International School of Medicine, International Institutes of Medicine, Zhejiang University, Yiwu, China.

ORCID profiles: Xiaomin Yue, Lei Zhang

Funding

  • National Natural Science Foundation of China
  • New Cornerstone Science Foundation
  • Fundamental and Interdisciplinary Disciplines Breakthrough Plan of the Ministry of Education of China
  • STI2030 Major Projects
  • Zhejiang Provincial Natural Science Foundation
  • Natural Science Foundation of Zhejiang Province

Cite

APA

Xu, Y., Tu, X., Jiang, H., Mo, J., Zhang, X., Yue, X., Tong, L., & Zhang, L. (2026). Drop‐Shaped Optical Microfiber Enabled Biomechanical Sensor. Advanced Science, 13(44). https://doi.org/10.1002/advs.75673

Vancouver

Xu Y, Tu X, Jiang H, Mo J, Zhang X, Yue X, et al. Drop‐Shaped Optical Microfiber Enabled Biomechanical Sensor. Advanced Science. 2026;13(44). doi:10.1002/advs.75673

BibTeX
@article{Xu2026,
  author = {Xu, Yan and Tu, Xitao and Jiang, Haochen and Mo, Jun and Zhang, Xinyue and Yue, Xiaomin and Tong, Limin and Zhang, Lei},
  title = {Drop‐Shaped Optical Microfiber Enabled Biomechanical Sensor},
  journal = {Advanced Science},
  year = {2026},
  volume = {13},
  number = {44},
  doi = {10.1002/advs.75673}
}
Start for free →