Interfacial Polysulfide Confinement via Spatially Controlled Sulfonated Metal–Organic Polyhedra Coatings in Lithium–Sulfur Batteries
Advanced Science · 2026-07 · 13 (38)
DOI: 10.1002/advs.75347 ↗At a glance
Journal article in Advanced Science, published online on 2026-04-16. Written by Soyeon Ko and 8 co-authors. Institution: Chemical Engineering, Fulton Schools of Engineering, Arizona State University, Tempe, Arizona, USA. Cited 2 times so far (Crossref); 59 references. The full text is freely available (open access, CC BY 4.0). Funded by: National Research Foundation of Korea, Korea government (MSIT), Ministry of Trade, Industry and Energy (MOTIE, Korea).
Abstract (original language)
Lithium‐sulfur (Li‐S) batteries offer a high theoretical specific energy of 2600 Wh kg −1 , yet commercialization remains limited by poor sulfur conductivity and structural instability of sulfur electrodes due to polysulfide (Li‐PS) dissolution and shuttling. Here, a sulfonated zirconium‐based metal organic polyhedron (SMOP) is introduced as a molecularly dispersible additive for nanoscale interfacial engineering at 3 wt.% in the sulfur–carbon composite. Two placement modes are implemented, where SMOP is assembled as a conformal interfacial coating on sulfur‐loaded hollow carbon spheres (SMOP‐S‐HCS), whereas SMOP is introduced by co‐deposition/physical blending with Ketjen black (SMOP‐S‐KB), producing a dispersed/buried distribution without a defined surface layer. SMOP‐S‐HCS delivers a low shuttle charge ( Q PS ) of 54.0 mAh g S −1 , whereas SMOP‐S‐KB exhibits approximately 1.7‐fold higher Q PS despite identical SMOP loading during the Li‐PS shuttle current measurement. SMOP‐S‐HCS delivers robust rate capability with discharge capacity ranging from ∼1500 to ∼800 mAh g S −1 from 0.05 to 2C and sustained discharge capacity of 850 mAh g S −1 after 400 cycles at 0.3C. Ex situ sulfur K‐edge XAS confirms the effectiveness of SMOP functional barrier against Li‐PS shuttling by probing more reversible sulfur speciation and reduced oxidized sulfur buildup during cycling.
Subjects
Author keywords
Authors and institutions
- Chemical Engineering, Fulton Schools of Engineering, Arizona State University, Tempe, Arizona, USA.
- Department of Chemical and Biological Engineering, Sookmyung Women's University, Seoul, Republic of Korea.
- Materials Science and Engineering, Fulton Schools of Engineering, Arizona State University, Tempe, Arizona, USA.
- School of Electrical, Computer and Energy Engineering, Arizona State University, Tempe, Arizona, USA.
ORCID profiles: Yoon Hwa
Funding
- National Research Foundation of Korea
- Korea government (MSIT)
- Ministry of Trade, Industry and Energy (MOTIE, Korea)
- Industrial Technology Alchemist Project
Cite
APA
Ko, S., Moon, W., Zhu, Y., An, Y., Lu, Y., Bal, S., Mu, L., Choi, K. M., & Hwa, Y. (2026). Interfacial Polysulfide Confinement via Spatially Controlled Sulfonated Metal–Organic Polyhedra Coatings in Lithium–Sulfur Batteries. Advanced Science, 13(38). https://doi.org/10.1002/advs.75347
Vancouver
Ko S, Moon W, Zhu Y, An Y, Lu Y, Bal S, et al. Interfacial Polysulfide Confinement via Spatially Controlled Sulfonated Metal–Organic Polyhedra Coatings in Lithium–Sulfur Batteries. Advanced Science. 2026;13(38). doi:10.1002/advs.75347
BibTeX
@article{Ko2026,
author = {Ko, Soyeon and Moon, WooYeon and Zhu, Yuwei and An, Yuhui and Lu, Yunyuan and Bal, Sourayan and Mu, Linqin and Choi, Kyung Min and Hwa, Yoon},
title = {Interfacial Polysulfide Confinement via Spatially Controlled Sulfonated Metal–Organic Polyhedra Coatings in Lithium–Sulfur Batteries},
journal = {Advanced Science},
year = {2026},
volume = {13},
number = {38},
doi = {10.1002/advs.75347}
}
EUVIMED