EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Interfacial Polysulfide Confinement via Spatially Controlled Sulfonated Metal–Organic Polyhedra Coatings in Lithium–Sulfur Batteries

Soyeon Ko, WooYeon Moon, Yuwei Zhu, Yuhui An, Yunyuan Lu, Sourayan Bal, Linqin Mu, Kyung Min Choi, Yoon Hwa iD

Advanced Science · 2026-07 · 13 (38)

DOI: 10.1002/advs.75347 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Science, online erschienen am 16.04.2026. Verfasst von Soyeon Ko und 8 weiteren Autor:innen. Beteiligte Einrichtung: Chemical Engineering, Fulton Schools of Engineering, Arizona State University, Tempe, Arizona, USA. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 59 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Research Foundation of Korea, Korea government (MSIT), Ministry of Trade, Industry and Energy (MOTIE, Korea).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Lithium‐sulfur (Li‐S) batteries offer a high theoretical specific energy of 2600 Wh kg −1 , yet commercialization remains limited by poor sulfur conductivity and structural instability of sulfur electrodes due to polysulfide (Li‐PS) dissolution and shuttling. Here, a sulfonated zirconium‐based metal organic polyhedron (SMOP) is introduced as a molecularly dispersible additive for nanoscale interfacial engineering at 3 wt.% in the sulfur–carbon composite. Two placement modes are implemented, where SMOP is assembled as a conformal interfacial coating on sulfur‐loaded hollow carbon spheres (SMOP‐S‐HCS), whereas SMOP is introduced by co‐deposition/physical blending with Ketjen black (SMOP‐S‐KB), producing a dispersed/buried distribution without a defined surface layer. SMOP‐S‐HCS delivers a low shuttle charge ( Q PS ) of 54.0 mAh g S −1 , whereas SMOP‐S‐KB exhibits approximately 1.7‐fold higher Q PS despite identical SMOP loading during the Li‐PS shuttle current measurement. SMOP‐S‐HCS delivers robust rate capability with discharge capacity ranging from ∼1500 to ∼800 mAh g S −1 from 0.05 to 2C and sustained discharge capacity of 850 mAh g S −1 after 400 cycles at 0.3C. Ex situ sulfur K‐edge XAS confirms the effectiveness of SMOP functional barrier against Li‐PS shuttling by probing more reversible sulfur speciation and reduced oxidized sulfur buildup during cycling.

Schlagwörter

Stichwörter der Autor:innen

functional coatinglithium polysulfidelithium–sulfur batteriesmetal–organic polyhedrasulfur‐carbon composite

Autor:innen und Institutionen

  • Chemical Engineering, Fulton Schools of Engineering, Arizona State University, Tempe, Arizona, USA.
  • Department of Chemical and Biological Engineering, Sookmyung Women's University, Seoul, Republic of Korea.
  • Materials Science and Engineering, Fulton Schools of Engineering, Arizona State University, Tempe, Arizona, USA.
  • School of Electrical, Computer and Energy Engineering, Arizona State University, Tempe, Arizona, USA.

ORCID-Profile: Yoon Hwa

Förderung

  • National Research Foundation of Korea
  • Korea government (MSIT)
  • Ministry of Trade, Industry and Energy (MOTIE, Korea)
  • Industrial Technology Alchemist Project

Zitieren

APA

Ko, S., Moon, W., Zhu, Y., An, Y., Lu, Y., Bal, S., Mu, L., Choi, K. M., & Hwa, Y. (2026). Interfacial Polysulfide Confinement via Spatially Controlled Sulfonated Metal–Organic Polyhedra Coatings in Lithium–Sulfur Batteries. Advanced Science, 13(38). https://doi.org/10.1002/advs.75347

Vancouver

Ko S, Moon W, Zhu Y, An Y, Lu Y, Bal S, et al. Interfacial Polysulfide Confinement via Spatially Controlled Sulfonated Metal–Organic Polyhedra Coatings in Lithium–Sulfur Batteries. Advanced Science. 2026;13(38). doi:10.1002/advs.75347

BibTeX
@article{Ko2026,
  author = {Ko, Soyeon and Moon, WooYeon and Zhu, Yuwei and An, Yuhui and Lu, Yunyuan and Bal, Sourayan and Mu, Linqin and Choi, Kyung Min and Hwa, Yoon},
  title = {Interfacial Polysulfide Confinement via Spatially Controlled Sulfonated Metal–Organic Polyhedra Coatings in Lithium–Sulfur Batteries},
  journal = {Advanced Science},
  year = {2026},
  volume = {13},
  number = {38},
  doi = {10.1002/advs.75347}
}
Kostenlos starten →