Laser‐Induced Graphene Enabled Additive Manufacturing of Multifunctional 3D Architectures with Freeform Structures
Advanced Science · 2023-02 · 10 (4)
DOI: 10.1002/advs.202204990 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Science, online erschienen am 27.11.2022. Verfasst von Fu Liu und 8 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical Engineering & Automation, Beihang University, No. 37 Xueyuan Road, Beijing, 100191, China. Die Arbeit wurde bisher 48-mal zitiert (Crossref) und nennt 60 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Beijing Natural Science Foundation, BEIGE Institute.
Abstract (Originalsprache)
3D printing has become an important strategy for constructing graphene smart structures with arbitrary shapes and complexities. Compared with graphene oxide ink/gel/resin based manners, laser‐induced graphene (LIG) is unique for facile and scalable assembly of 1D and 2D structures but still faces size and shape obstacles for constructing 3D macrostructures. In this work, a brand‐new LIG based additive manufacturing (LIG‐AM) protocol is developed to form bulk 3D graphene with freeform structures without introducing extra binders, templates, and catalysts. On the basis of selective laser sintering, LIG‐AM creatively irradiates polyimide (PI) powder‐bed for triggering both particle‐sintering and graphene‐converting processes layer‐by‐layer, which is unique for assembling varied types of graphene architectures including identical‐section, variable‐section, and graphene/PI hybrid structures. In addition to exploring combined graphitizing and fusing discipline, processing efficiency and assembling resolution of LIG‐AM are also balanceable through synergistic control of lasing power and powder‐feeding thickness. By further studying various process dependent properties, a LIG‐AM enabled aircraft‐wing section model is finally printed to comprehensively demonstrate its shiftable process, hybridizable structure, and multifunctional performance including force‐sensing, anti‐icing/deicing, and microwave shielding and absorption.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Mechanical Engineering & Automation, Beihang University, No. 37 Xueyuan Road, Beijing, 100191, China.
- School of Automation Science and Electrical Engineering, Beihang University, No. 37 Xueyuan Road, Beijing, 100191, China.
ORCID-Profile: Sida Luo
Förderung
- National Natural Science Foundation of China
- Beijing Natural Science Foundation
- BEIGE Institute
- China Postdoctoral Science Foundation
- Natural Science Foundation of Beijing Municipality
Zitieren
APA
Liu, F., Gao, Y., Wang, G., Wang, D., Wang, Y., He, M., Ding, X., Duan, H., & Luo, S. (2023). Laser‐Induced Graphene Enabled Additive Manufacturing of Multifunctional 3D Architectures with Freeform Structures. Advanced Science, 10(4). https://doi.org/10.1002/advs.202204990
Vancouver
Liu F, Gao Y, Wang G, Wang D, Wang Y, He M, et al. Laser‐Induced Graphene Enabled Additive Manufacturing of Multifunctional 3D Architectures with Freeform Structures. Advanced Science. 2023;10(4). doi:10.1002/advs.202204990
BibTeX
@article{Liu2023,
author = {Liu, Fu and Gao, Yan and Wang, Guantao and Wang, Dan and Wang, Yanan and He, Meihong and Ding, Xilun and Duan, Haibin and Luo, Sida},
title = {Laser‐Induced Graphene Enabled Additive Manufacturing of Multifunctional 3D Architectures with Freeform Structures},
journal = {Advanced Science},
year = {2023},
volume = {10},
number = {4},
doi = {10.1002/advs.202204990}
}
EUVIMED