PEDOT: PSS‐Enabled CNT and Bi 0.5 Sb 1.5 Te 3 Interface Microengineering for Integrated Thermoelectric Energy Harvesting and Corrosion Protection in Cementitious Composite
Advanced Science · 2025-11 · 12 (42)
DOI: 10.1002/advs.202508424 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Science, online erschienen am 19.08.2025. Verfasst von Chen Zhang und 6 weiteren Autor:innen. Beteiligte Einrichtung: Guangdong Provincial Key Laboratory of Durability for Marine Civil Engineering, Shenzhen University, Shenzhen, 518060, P. R. China. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 46 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Bureau of Finance of Shenzhen Municipality, Shenzhen Key Laboratory for Low-Carbon Construction Material and Technology.
Abstract (Originalsprache)
Thermoelectric cement‐based composites integrate thermoelectric effects with structural capabilities, presenting an effective solution for harvesting environmental heat in self‐powered cathodic protection. While the prospects are promising, their performance has been constrained by the compatibility between functional fillers and cementitious materials. This study demonstrates that PEDOT: PSS(PP) significantly improves the dispersion of multi‐walled carbon nanotube (CNT) and Bi 0.5 Sb 1.5 Te 3 (BST) in cementitious materials. The optimized composite(0.2 wt.% CNT, 1.0 vol% PP, and 1.0 wt.% BST) exhibits a 28.4% increase in conductivity and a 15.9% reduction in thermal conductivity compared to the control. Additionally, it achieves an impressive Seebeck coefficient of 450 µV K −1 . Importantly, the composite maintains superior compressive strength (> 40 MPa) and chloride penetration resistance (< 7 × 10 −12 m 2 s −1 ), with over 80% property retention after 60 days under extreme temperatures of −20 or 70 °C. A thermoelectric generator (TEG) is assembled by connecting 30 specimens in series to form a 10 × 10 cm 2 device. The TEG exhibits less than 8% voltage decay during 20 h of continuous operation and successfully powered an LED. The TEG also substantially mitigates steel corrosion in self‐powered cathodic protection, reducing corrosion current density and corrosion rate by more than 47%.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Guangdong Provincial Key Laboratory of Durability for Marine Civil Engineering, Shenzhen University, Shenzhen, 518060, P. R. China.
- School of Mechanics and Construction Engineering, Jinan University, Guangzhou, 51063, P. R. China.
ORCID-Profile: Yinghui Wu
Förderung
- National Natural Science Foundation of China
- Bureau of Finance of Shenzhen Municipality
- Shenzhen Key Laboratory for Low-Carbon Construction Material and Technology
Zitieren
APA
Zhang, C., Zhou, Y., Xing, F., Guo, M., Wu, J., Wang, J., & Wu, Y. (2025). PEDOT: PSS‐Enabled CNT and Bi 0.5 Sb 1.5 Te 3 Interface Microengineering for Integrated Thermoelectric Energy Harvesting and Corrosion Protection in Cementitious Composite. Advanced Science, 12(42). https://doi.org/10.1002/advs.202508424
Vancouver
Zhang C, Zhou Y, Xing F, Guo M, Wu J, Wang J, et al. PEDOT: PSS‐Enabled CNT and Bi 0.5 Sb 1.5 Te 3 Interface Microengineering for Integrated Thermoelectric Energy Harvesting and Corrosion Protection in Cementitious Composite. Advanced Science. 2025;12(42). doi:10.1002/advs.202508424
BibTeX
@article{Zhang2025,
author = {Zhang, Chen and Zhou, Yingwu and Xing, Feng and Guo, Menghuan and Wu, Jiawei and Wang, Junfeng and Wu, Yinghui},
title = {PEDOT: PSS‐Enabled CNT and Bi 0.5 Sb 1.5 Te 3 Interface Microengineering for Integrated Thermoelectric Energy Harvesting and Corrosion Protection in Cementitious Composite},
journal = {Advanced Science},
year = {2025},
volume = {12},
number = {42},
doi = {10.1002/advs.202508424}
}
EUVIMED