Topographical Patterning of Cell‐Repellent Interfaces for Immune‐Stealth Implantable Electronics via Multiphoton Ablation Lithography
Advanced Science · 2025
DOI: 10.1002/advs.202506482 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Science, 2025. Verfasst von Hyunseon Seo und 16 weiteren Autor:innen. Beteiligte Einrichtung: Biomaterials Research Center, Biomedical Research Division, Korea Institute of Science and Technology, Seoul, 02792, Republic of Korea. Hauptthemen laut MEDLINE: Prostheses and Implants, Electronics. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 62 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Korea Institute of Science and Technology, National Research Foundation of Korea, KU-KIST Graduate School of Converging Science and Technology Program.
Abstract (Originalsprache)
Stable and reliable operation of implantable electronics must ensure both high‐quality electrical performance and chronic biocompatibility. Here, immune‐stealth implantable electronics fabricated by multiphoton ablation lithography are introduced. The cell‐repellent interface, consisting of micro‐grooves and nano‐islands, can be created by laser‐assisted topography patterning on a thin film substrate. This patterned surface demonstrates a 20‐fold increase in cell‐repellent effectiveness against immune cells such as macrophages and fibroblasts due to disturbance of focal adhesion. Furthermore, the cell‐repellent interface can also be patterned on the sub‐micron electrode layer without compromising its electrical and electrochemical performance. When the electrocardiogram (ECG) sensor applying the cell‐repellent interface is implanted into a rat subcutaneous tissue, inflammation and fibrotic reactions are effectively suppressed for 6 weeks. Consequently, stable ECG readings with clear PQRST waveforms are obtained in real‐time for 4 weeks, suggesting its potential to enhance chronic biocompatibility of implantable electronics.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Biomaterials Research Center, Biomedical Research Division, Korea Institute of Science and Technology, Seoul, 02792, Republic of Korea.
- School of Medicine, Sungkyunkwan University, Suwon, 16419, Republic of Korea.
- KU-KIST Graduate School of Converging Science and Technology, Korea University, Seoul, 02841, Republic of Korea.
- Department of Mechanical Engineering, Seoul National University, Seoul, 08826, Republic of Korea.
- SK Hynix Co., Ltd., Incheon, 17336, Republic of Korea.
- Biomedical Engineering Research Center, Asan Institute for Life Sciences, Asan Medical Center, College of Medicine, University of Ulsan, Seoul, 05505, Republic of Korea.
ORCID-Profile: Hojeong Jeon
Förderung
- Korea Institute of Science and Technology
- National Research Foundation of Korea
- KU-KIST Graduate School of Converging Science and Technology Program
Zitieren
APA
Seo, H., Ko, G. J., Song, S., Lee, J. H., Seo, Y., Han, S., Eom, C. H., Kim, H., Kim, S., Lee, K. S., Kim, Y. C., Kim, H., Moon, S. E., Lee, K., Ko, S. H., Hwang, S. W., & Jeon, H. (2025). Topographical Patterning of Cell‐Repellent Interfaces for Immune‐Stealth Implantable Electronics via Multiphoton Ablation Lithography. Advanced Science. https://doi.org/10.1002/advs.202506482
Vancouver
Seo H, Ko GJ, Song S, Lee JH, Seo Y, Han S, et al. Topographical Patterning of Cell‐Repellent Interfaces for Immune‐Stealth Implantable Electronics via Multiphoton Ablation Lithography. Advanced Science. 2025. doi:10.1002/advs.202506482
BibTeX
@article{Seo2025,
author = {Seo, Hyunseon and Ko, Gwan-Jin and Song, Sangmin and Lee, Joong Hoon and Seo, Youngmin and Han, Sungkeun and Eom, Chan-Hwi and Kim, Hyewon and Kim, Seongsoo and Lee, Kang-Sik and Kim, Yu-Chan and Kim, Hojun and Moon, Si-Eun and Lee, Kyungwoo and Ko, Seung Hwan and Hwang, Suk-Won and Jeon, Hojeong},
title = {Topographical Patterning of Cell‐Repellent Interfaces for Immune‐Stealth Implantable Electronics via Multiphoton Ablation Lithography},
journal = {Advanced Science},
year = {2025},
doi = {10.1002/advs.202506482}
}
EUVIMED