EUVIMEDOpdag EUVIMED
Open access · CC BY 4.0

Biomimetic Microfluidic Pumps for Selective Oil–Water Separation

Zhaolong Wang, Yinfeng Li, Mingzhu Xie, Ziheng Zhan, Wenhao Li, Qihui Xie, Yong Shuai, Zhichao Dong, Zuankai Wang iD

Advanced Science · 2025-07 · 12 (27)

DOI: 10.1002/advs.202503511 ↗

At a glance

Journal article in Advanced Science, published online on 2025-04-26. Written by Zhaolong Wang and 8 co-authors. Institution: School of Energy Science and Engineering, Harbin Institute of Technology, Harbin, 150001, P. R. China. Cited 23 times so far (Crossref); 57 references. The full text is freely available (open access, CC BY 4.0). Funded by: National Natural Science Foundation of China.

AbstractSubjectsBibliografiske oplysningerCiteRelated studies

Abstract (original language)

Addressing the challenges posed by oil pollution from both domestic and industrial sources—which contributes to energy waste and environmental degradation—is critical. Here, a new, efficient, and sustainable oil/water separation system is presented using biomimetic spring microchannels created through precise projection micro‐stereolithography‐based 3D printing technique. This innovative system allows for the swift separation of mixed oil and water phases into distinct and pure streams, achieving a high separation flux of up to 292.5 L m −2 h −1 . The separation efficiency, consistently maintained over 99%, leverages the synergistic effects of surface wettability and molecular polarity to handle multiple oils with varying densities and surface tensions. Moreover, the biomimetic microchannels precise capturing of the oil/water interface and offer flexibility to initiate separation by prefilling the channels with either oil or water. Furthermore, these microchannels effectively prevent clogging, ensuring sustained performance. A significant enhancement is also demonstrated in separating crude oil from water by solar irradiation to reduce its viscosity, with a notable separation rate of 22.5 L m −2 h −1 for individual channels. The findings underscore the potential of 3D bionic functional spring microchannels for selectively separating a wide range of oil‐water mixtures with exceptional efficiency.

Subjects

Author keywords

automatic interface capturebionic spring microchannelflexible microfluidicsmicrofluidic pumpoil–water separation

Authors and institutions

  • School of Energy Science and Engineering, Harbin Institute of Technology, Harbin, 150001, P. R. China.
  • Zhengzhou Research Institute, Harbin Institute of Technology, Zhengzhou, 450046, China.
  • Technical Institute of Physics and Chemistry, Chinese Academy of Sciences, Beijing, 100190, P. R. China.
  • Department of Mechanical Engineering, Hong Kong Polytechnic University, Hong Kong, 999077, P. R. China.

ORCID profiles: Zuankai Wang

Funding

  • National Natural Science Foundation of China

Cite

APA

Wang, Z., Li, Y., Xie, M., Zhan, Z., Li, W., Xie, Q., Shuai, Y., Dong, Z., & Wang, Z. (2025). Biomimetic Microfluidic Pumps for Selective Oil–Water Separation. Advanced Science, 12(27). https://doi.org/10.1002/advs.202503511

Vancouver

Wang Z, Li Y, Xie M, Zhan Z, Li W, Xie Q, et al. Biomimetic Microfluidic Pumps for Selective Oil–Water Separation. Advanced Science. 2025;12(27). doi:10.1002/advs.202503511

BibTeX
@article{Wang2025,
  author = {Wang, Zhaolong and Li, Yinfeng and Xie, Mingzhu and Zhan, Ziheng and Li, Wenhao and Xie, Qihui and Shuai, Yong and Dong, Zhichao and Wang, Zuankai},
  title = {Biomimetic Microfluidic Pumps for Selective Oil–Water Separation},
  journal = {Advanced Science},
  year = {2025},
  volume = {12},
  number = {27},
  doi = {10.1002/advs.202503511}
}
Start for free →