High‐Performance Polymer‐derived Ceramics in LCD 3D Printing
Advanced Science · 2025-05 · 12 (18)
DOI: 10.1002/advs.202416176 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Science, online erschienen am 17.03.2025. Verfasst von H Yazdani Sarvestani und 6 weiteren Autor:innen. Beteiligte Einrichtung: Aerospace Manufacturing Technology Centre, National Research Council Canada, Montreal, QC, H3T 2B2, Canada. Die Arbeit wurde bisher 20-mal zitiert (Crossref) und nennt 52 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Research Council Canada.
Abstract (Originalsprache)
This study demonstrates the fabrication of high‐strength, lightweight polymer‐derived ceramics (PDCs) using silicon oxycarbide (SiOC)‐precursor formulations with liquid crystal display (LCD) vat photopolymerization (VPP) technology. Complex geometries, such as gyroids and stochastic lattices, are successfully 3D‐printed and evaluated under varying feature thicknesses and pyrolysis temperatures (800 °C and 1200 °C). Photorheology and thermogravimetric analysis (TGA) validated the efficient curing and pyrolysis characteristics of a printable precursor formulation based on vinyl methoxysiloxane homopolymer (VMM‐010), which demonstrated rapid curing, low viscosity, and compatibility with LCD 3D printing, ensuring precise layering and efficient resin removal. Micro‐CT scans confirmed its structural integrity and absence of voids, even in relatively thick components (≈3 mm). The VMM‐based PDC lattices achieved specific compressive strengths up to 9.4 MPa g⁻¹ cm 3 , a 50‐fold improvement over comparable lattices produced with a high‐porosity SiOC PDC, and exceptional high‐temperature stability, maintaining structural integrity after 2 h at 1500 °C. Compositional analysis revealed lower free carbon content and improved ceramic phase formation, driving the enhanced mechanical and thermal performance of the VMM‐based ceramic. These findings underscore the scalability, reliability, and superior performance of VMM formulations for LCD 3D printing, offering new possibilities for high‐performance ceramic applications in aerospace, automotive, and biomedical industries.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Aerospace Manufacturing Technology Centre, National Research Council Canada, Montreal, QC, H3T 2B2, Canada.
- Division of Emerging Technologies, National Research Council Canada, Ottawa, ON, K1A 0R6, Canada.
ORCID-Profile: H Yazdani Sarvestani, V Karamzadeh, A Kulkarni, A Sohrabi-Kashani, T Lacelle, B Ashrafi
Förderung
- National Research Council Canada
Zitieren
APA
Yazdani Sarvestani, H., Karamzadeh, V., Kulkarni, A., Sohrabi-Kashani, A., Lacelle, T., Jakubinek, M. B., & Ashrafi, B. (2025). High‐Performance Polymer‐derived Ceramics in LCD 3D Printing. Advanced Science, 12(18). https://doi.org/10.1002/advs.202416176
Vancouver
Yazdani Sarvestani H, Karamzadeh V, Kulkarni A, Sohrabi-Kashani A, Lacelle T, Jakubinek MB, et al. High‐Performance Polymer‐derived Ceramics in LCD 3D Printing. Advanced Science. 2025;12(18). doi:10.1002/advs.202416176
BibTeX
@article{YazdaniSarvestani2025,
author = {Yazdani Sarvestani, H and Karamzadeh, V and Kulkarni, A and Sohrabi-Kashani, A and Lacelle, T and Jakubinek, M B and Ashrafi, B},
title = {High‐Performance Polymer‐derived Ceramics in LCD 3D Printing},
journal = {Advanced Science},
year = {2025},
volume = {12},
number = {18},
doi = {10.1002/advs.202416176}
}
EUVIMED