Universal Copolymerization of Crosslinked Polyether Electrolytes for All‐Solid‐State Lithium‐Metal Batteries
Advanced Science · 2024-09 · 11 (36)
DOI: 10.1002/advs.202405482 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Science, online erschienen am 29.07.2024. Verfasst von Chengjun Lei und 7 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Chem/Bio-Sensing and Chemometrics, Joint International Research Laboratory of Energy Electrochemistry, College of Chemistry a…. Die Arbeit wurde bisher 41-mal zitiert (Crossref) und nennt 73 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key Research and Development Program, National Natural Science Foundation of China, Major Program of the Natural Science Foundation of Hunan Province.
Abstract (Originalsprache)
Solid polymer electrolytes (SPEs) are pivotal in advancing the practical implementation of all‐solid‐state batteries. Poly(1,3‐dioxane) (PDOL)‐based electrolytes have attracted significant attention due to the pseudo‐high conductivity achieved through sophisticated in situ polymerization methods; however, such PDOL‐based electrolytes present challenges of crystallization over time and monomers residual during processing. In this study, integrating LiTFSI and LiDFOB as a universal copolymerization strategy for developing high‐performance PDOL electrolytes with a wide range of epoxy crosslinkers is proposed. It is discovered that this approach leverages the protective effects of TFSI anions on the boron active center and catalyzes polymer chain growth via crosslinking. The homogenously crosslinked (benzene‐centered) PDOL electrolyte exhibits remarkable thermo‐mechanical stability (up to 100 °C), high ion migration number ( t Li+ = 0.42), a wide electrochemical window (≈5.0 V vs Li + /Li), and high ionic conductivity (4.5×10 −4 S cm −1 ). Notably, the crosslinked PDOL electrolyte is in the all‐solid‐state with minimal monomer/oligomer residual, exhibiting no crystallization during relaxation, delivering a robust performance in all‐solid‐state lithium metal batteries.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- State Key Laboratory of Chem/Bio-Sensing and Chemometrics, Joint International Research Laboratory of Energy Electrochemistry, College of Chemistry and Chemical Engineering, Hunan University, Changsha, 410082, China.
ORCID-Profile: Chengjun Lei, Xiao Liang
Förderung
- National Key Research and Development Program
- National Natural Science Foundation of China
- Major Program of the Natural Science Foundation of Hunan Province
- National Key Research and Development Program of China
Zitieren
APA
Lei, C., Zhou, T., Zhang, M., Liu, T., Xu, C., Wang, R., He, X., & Liang, X. (2024). Universal Copolymerization of Crosslinked Polyether Electrolytes for All‐Solid‐State Lithium‐Metal Batteries. Advanced Science, 11(36). https://doi.org/10.1002/advs.202405482
Vancouver
Lei C, Zhou T, Zhang M, Liu T, Xu C, Wang R, et al. Universal Copolymerization of Crosslinked Polyether Electrolytes for All‐Solid‐State Lithium‐Metal Batteries. Advanced Science. 2024;11(36). doi:10.1002/advs.202405482
BibTeX
@article{Lei2024,
author = {Lei, Chengjun and Zhou, Tiankun and Zhang, Mingjie and Liu, Tingting and Xu, Chen and Wang, Rui and He, Xin and Liang, Xiao},
title = {Universal Copolymerization of Crosslinked Polyether Electrolytes for All‐Solid‐State Lithium‐Metal Batteries},
journal = {Advanced Science},
year = {2024},
volume = {11},
number = {36},
doi = {10.1002/advs.202405482}
}
EUVIMED