In Situ Polymerized Polyfluorinated Crosslinked Polyether Electrolytes for High‐Voltage Lithium Metal Batteries
Advanced Materials · 2025-07 · 37 (29)
DOI: 10.1002/adma.202504333 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 02.05.2025. Verfasst von Shimei Li und 9 weiteren Autor:innen. Beteiligte Einrichtung: Department of Materials Science and Engineering, City University of Hong Kong, 83 Tat Chee Avenue, Hong Kong SAR, 999077, P. R. China. Die Arbeit wurde bisher 61-mal zitiert (Crossref) und nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0). Gefördert von: National Key R&D Program of China, Research Grants Council of the Hong Kong Special Administrative Region, China, InnoHK Project at Hong Kong Centre for Cerebro-cardiovascular Health Engineering (COCHE).
Abstract (Originalsprache)
In situ polymerized polyether electrolytes are promising for solid‐state Li metal batteries due to their high ionic conductivity and excellent interfacial contact. However, their practical application is hindered by Li dendrite formation, interfacial degradation, and limited oxidative stability. Herein, we propose an in situ polymerized polyfluorinated crosslinked polyether electrolyte (PDOL‐OFHDBO), synthesized by copolymerizing 1,3‐dioxolane (DOL) with 2,2′‐(2,2,3,3,4,4,5,5‐octafluorohexane‐1,6‐diyl)bis(oxirane) (OFHDBO) as a polyfluorinated crosslinker. The electron‐withdrawing polyfluorinated groups endow PDOL‐OFHDBO with enhanced oxidative stability and interfacial compatibility, while reducing the solvation power of the polymer matrix to promote an anion‐derived inorganic‐rich solid electrolyte interphase for uniform Li deposition. Consequently, PDOL‐OFHDBO exhibits a wide electrochemical stability window (>5.6 V) and enables long‐term stable Li plating/stripping for over 1100 h. Furthermore, Li||LiNi 0.8 Co 0.1 Mn 0.1 O 2 (NCM811) full cells utilizing PDOL‐OFHDBO demonstrate outstanding cycling stability with high‐loading cathodes (≈3.8 mAh cm −2 ) and thin Li anodes (50 µm), achieving capacity retention of 95.5% and 89.1% over 100 cycles at cut‐off voltages of 4.3 and 4.5 V, respectively. Remarkably, Ah‐level Li||NCM811 pouch cells deliver an impressive specific energy of 401.8 Wh kg −1 , highlighting their potential for practical solid‐state Li metal batteries.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Materials Science and Engineering, City University of Hong Kong, 83 Tat Chee Avenue, Hong Kong SAR, 999077, P. R. China.
- Hong Kong Centre for Cerebro-Cardiovascular Health Engineering (COCHE), Shatin, NT, Hong Kong SAR, 999077, P. R. China.
- Center for Advanced Nuclear Safety and Sustainable Development, City University of Hong Kong, Kowloon, Hong Kong SAR, 999077, P. R. China.
ORCID-Profile: Chunyi Zhi
Förderung
- National Key R&D Program of China
- Research Grants Council of the Hong Kong Special Administrative Region, China
- InnoHK Project at Hong Kong Centre for Cerebro-cardiovascular Health Engineering (COCHE)
- National Key Research and Development Program of China
Zitieren
APA
Li, S., Hong, H., Yang, X., Li, D., Xiong, Q., Zhang, D., Wang, S., Huang, Z., Lv, H., & Zhi, C. (2025). In Situ Polymerized Polyfluorinated Crosslinked Polyether Electrolytes for High‐Voltage Lithium Metal Batteries. Advanced Materials, 37(29). https://doi.org/10.1002/adma.202504333
Vancouver
Li S, Hong H, Yang X, Li D, Xiong Q, Zhang D, et al. In Situ Polymerized Polyfluorinated Crosslinked Polyether Electrolytes for High‐Voltage Lithium Metal Batteries. Advanced Materials. 2025;37(29). doi:10.1002/adma.202504333
BibTeX
@article{Li2025,
author = {Li, Shimei and Hong, Hu and Yang, Xinru and Li, Dedi and Xiong, Qi and Zhang, Dechao and Wang, Shixun and Huang, Zhaodong and Lv, Haiming and Zhi, Chunyi},
title = {In Situ Polymerized Polyfluorinated Crosslinked Polyether Electrolytes for High‐Voltage Lithium Metal Batteries},
journal = {Advanced Materials},
year = {2025},
volume = {37},
number = {29},
doi = {10.1002/adma.202504333}
}
EUVIMED