EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Voxel Design of Grayscale DLP 3D‐Printed Soft Robots

Mengjie Zhang, Xiru Fan, Le Dong, Chengru Jiang, Oliver Weeger, Kun Zhou, Dong Wang iD

Advanced Science · 2024-07 · 11 (28)

DOI: 10.1002/advs.202309932 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Science, online erschienen am 20.05.2024. Verfasst von Mengjie Zhang und 6 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Mechanical System and Vibration, School of Mechanical Engineering, Shanghai Jiao Tong University, Shanghai, 200240, China. Die Arbeit wurde bisher 29-mal zitiert (Crossref) und nennt 55 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, National Key Research and Development Program of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Grayscale digital light processing (DLP) printing is a simple yet effective way to realize the variation of material properties by tuning the grayscale value. However, there is a lack of available design methods for grayscale DLP 3D‐printed structures due to the complexities arising from the voxel‐level grayscale distribution, nonlinear material properties, and intricate structures. Inspired by the dexterous motions of natural organisms, a design and fabrication framework for grayscale DLP‐printed soft robots is developed by combining a grayscale‐dependent hyperelastic constitutive model and a voxel‐based finite‐element model. The constitutive model establishes the relationship between the projected grayscale value and the nonlinear mechanical properties, while the voxel‐based finite‐element model enables fast and efficient calculation of the mechanical performances with arbitrarily distributed material properties. A multiphysics modeling and experimental method is developed to validate the homogenization assumption of the degree of conversion (DoC) variation in a single voxel. The design framework is used to design structures with reduced stress concentration and programmable multimodal motions. This work paves the way for integrated design and fabrication of functional structures using grayscale DLP 3D printing.

Schlagwörter

Stichwörter der Autor:innen

grayscale DLP 3D printinghyperelastic constitutive modelmultimodal soft robotsprogrammable mechanical behaviorsvoxel‐based finite‐element model

Autor:innen und Institutionen

  • State Key Laboratory of Mechanical System and Vibration, School of Mechanical Engineering, Shanghai Jiao Tong University, Shanghai, 200240, China.
  • Meta Robotics Institute, Shanghai Jiao Tong University, Shanghai, 200240, China.
  • Cyber-Physical Simulation Group & Additive Manufacturing Center, Department of Mechanical Engineering, Technical University of Darmstadt, Dolivostr. 15, Darmstadt, 64293, Hessen, Germany.
  • Singapore Centre for 3D Printing, School of Mechanical and Aerospace Engineering, Nanyang Technological University, Singapore, 639798, Singapore.

ORCID-Profile: Dong Wang

Förderung

  • National Natural Science Foundation of China
  • National Key Research and Development Program of China

Zitieren

APA

Zhang, M., Fan, X., Dong, L., Jiang, C., Weeger, O., Zhou, K., & Wang, D. (2024). Voxel Design of Grayscale DLP 3D‐Printed Soft Robots. Advanced Science, 11(28). https://doi.org/10.1002/advs.202309932

Vancouver

Zhang M, Fan X, Dong L, Jiang C, Weeger O, Zhou K, et al. Voxel Design of Grayscale DLP 3D‐Printed Soft Robots. Advanced Science. 2024;11(28). doi:10.1002/advs.202309932

BibTeX
@article{Zhang2024,
  author = {Zhang, Mengjie and Fan, Xiru and Dong, Le and Jiang, Chengru and Weeger, Oliver and Zhou, Kun and Wang, Dong},
  title = {Voxel Design of Grayscale DLP 3D‐Printed Soft Robots},
  journal = {Advanced Science},
  year = {2024},
  volume = {11},
  number = {28},
  doi = {10.1002/advs.202309932}
}
Kostenlos starten →