3D Printing of Anisotropic Piezoresistive Pressure Sensors for Directional Force Perception
Advanced Science · 2024-06 · 11 (24)
DOI: 10.1002/advs.202309607 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Science, online erschienen am 13.03.2024. Verfasst von Jingfeng Liu und 4 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Polymer Materials Engineering, Polymer Research Institute of Sichuan University, Chengdu, 610065, China. Die Arbeit wurde bisher 68-mal zitiert (Crossref) und nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Sichuan Youth Science and Technology Innovation Research Team Project, Natural Science Foundation of Sichuan Province.
Abstract (Originalsprache)
Anisotropic pressure sensors are gaining increasing attention for next‐generation wearable electronics and intelligent infrastructure owing to their sensitivity in identifying different directional forces. 3D printing technologies have unparalleled advantages in the design of anisotropic pressure sensors with customized 3D structures for realizing tunable anisotropy. 3D printing has demonstrated few successes in utilizing piezoelectric nanocomposites for anisotropic recognition. However, 3D‐printed anisotropic piezoresistive pressure sensors (PPSs) remain unexplored despite their convenience in saving the poling process. This study pioneers the development of an aqueous printable ink containing waterborne polyurethane elastomer. An anisotropic PPS featuring tailorable flexibility in macroscopic 3D structures and microscopic pore morphologies is created by adopting direct ink writing 3D printing technology. Consequently, the desired directional force perception is achieved by programming the printing schemes. Notably, the printed PPS demonstrated excellent deformability, with a relative sensitivity of 1.22 (kPa * wt. %)−1 over a substantial pressure range (2.8 to 8.1 kPa), approximately fivefold than that of a state‐of‐the‐art carbon‐based PPS. This study underscores the versatility of 3D printing in customizing highly sensitive anisotropic pressure sensors for advanced sensing applications that are difficult to achieve using conventional measures.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- State Key Laboratory of Polymer Materials Engineering, Polymer Research Institute of Sichuan University, Chengdu, 610065, China.
ORCID-Profile: Xingang Liu, Chuhong Zhang
Förderung
- National Natural Science Foundation of China
- Sichuan Youth Science and Technology Innovation Research Team Project
- Natural Science Foundation of Sichuan Province
- Program for Featured Directions of Engineering Multi disciplines of Sichuan University
Zitieren
APA
Liu, J., Zhang, X., Liu, J., Liu, X., & Zhang, C. (2024). 3D Printing of Anisotropic Piezoresistive Pressure Sensors for Directional Force Perception. Advanced Science, 11(24). https://doi.org/10.1002/advs.202309607
Vancouver
Liu J, Zhang X, Liu J, Liu X, Zhang C. 3D Printing of Anisotropic Piezoresistive Pressure Sensors for Directional Force Perception. Advanced Science. 2024;11(24). doi:10.1002/advs.202309607
BibTeX
@article{Liu2024,
author = {Liu, Jingfeng and Zhang, Xuan and Liu, Jintao and Liu, Xingang and Zhang, Chuhong},
title = {3D Printing of Anisotropic Piezoresistive Pressure Sensors for Directional Force Perception},
journal = {Advanced Science},
year = {2024},
volume = {11},
number = {24},
doi = {10.1002/advs.202309607}
}
EUVIMED