Anisotropic Pressure Sensors Fabricated by 3D Printing‐Aligned Carbon Nanotube Composites
Advanced Engineering Materials · 2023-10 · 25 (20)
DOI: 10.1002/adem.202300510 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Engineering Materials, online erschienen am 30.08.2023. Verfasst von Yi Ting Chong und 6 weiteren Autor:innen. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 48 Literaturangaben. Gefördert von: Central Public-interest Scientific Institution Basal Research Fund, Chinese Academy of Fishery Sciences.
Abstract (Originalsprache)
The flexibility and controllability of 3D printing technologies have made them popular for creating integrated wearable sensors. However, producing sensors with 3D anisotropic response is still difficult with current printing materials and techniques. To address this challenge, digital light process (DLP) printing technology with blading function to fabricate 3D anisotropic pressure and strain sensors is used. By applying blading‐induced shearing force, nanoalignment of carbon nanotubes (CNTs) in each layer is achieved, while the continuous liquid interface production of the DLP printing process facilitates good electrical communication between adjacent microlayers. The constructed 3D sensor displays high tensile and pressure responses up to 40 MPa and the ability to detect pressure changes in all directions. Additionally, the resistance anisotropy ratio range is adjustable. Finite‐element method (FEM) simulation shows that the relative change in resistance has an anisotropic distribution that aligns well with experimental results. The work would offer a new way to create 3D anisotropic pressure/strain sensors for advanced flexible and stretchable sensing applications.
Förderung
- Central Public-interest Scientific Institution Basal Research Fund, Chinese Academy of Fishery Sciences
Zitieren
APA
Chong, Y. T., Wang, X., Cao, S., Cui, F., Zhu, Q., Xu, J., & Wang, F. (2023). Anisotropic Pressure Sensors Fabricated by 3D Printing‐Aligned Carbon Nanotube Composites. Advanced Engineering Materials, 25(20). https://doi.org/10.1002/adem.202300510
Vancouver
Chong YT, Wang X, Cao S, Cui F, Zhu Q, Xu J, et al. Anisotropic Pressure Sensors Fabricated by 3D Printing‐Aligned Carbon Nanotube Composites. Advanced Engineering Materials. 2023;25(20). doi:10.1002/adem.202300510
BibTeX
@article{Chong2023,
author = {Chong, Yi Ting and Wang, Xizu and Cao, Shuai and Cui, Fangsen and Zhu, Qiang and Xu, Jianwei and Wang, Fuke},
title = {Anisotropic Pressure Sensors Fabricated by 3D Printing‐Aligned Carbon Nanotube Composites},
journal = {Advanced Engineering Materials},
year = {2023},
volume = {25},
number = {20},
doi = {10.1002/adem.202300510}
}
EUVIMED