EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Defect Engineering of Hexagonal MAB Phase Ti 2 InB 2 as Anode of Lithium‐Ion Battery with Excellent Cycling Stability

Qing Shen, Yang Shi, Yibo He, Junjie Wang iD

Advanced Science · 2024-06 · 11 (21)

DOI: 10.1002/advs.202308589 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Science, online erschienen am 15.03.2024. Verfasst von Qing Shen und 3 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Solidification Processing, Northwestern Polytechnical University, Xi'an, Shaanxi, 710072, P. R. China. Die Arbeit wurde bisher 34-mal zitiert (Crossref) und nennt 49 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, National Key R&D Program of China, Fundamental Research Funds for the Central Universities.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Hexagonal MAB phases ( h ‐MAB) have attracted attention due to their potential to exfoliate into MBenes, similar to MXenes, which are predicted to be promising for Li‐ion battery applications. However, the high cost of synthesizing MBenes poses challenges for their use in batteries. This study presents a novel approach where a simple ball‐milling treatment is employed to enhance the purity of the h ‐MAB phase Ti 2 InB 2 and introduce significant indium defects, resulting in improved conductivity and the creation of abundant active sites. The synthesized Ti 2 InB 2 with indium defects (V In ‐Ti 2 InB 2 ) exhibits excellent electrochemical properties, particularly exceptional long‐cycle stability at current densities of 5 A g −1 (5000 cycles, average capacity decay of 0.0018%) and 10 A g −1 (15 000 cycles, average capacity decay of 0.093%). The charge storage mechanism of V In ‐Ti 2 InB 2 , involving a dual redox reaction, is proposed, where defects promote the In‐Li alloy reaction and a redox reaction with Li in the TiB layer. Finally, a Li‐ion full cell demonstrates cycling stability at 0.5 A g −1 after 350 cycles. This work presents the first accessible and scalable application of V In ‐Ti 2 InB 2 as a Li‐ion anode, unlocking a wealth of possibilities for sustainable electrochemical applications of h ‐MAB phases.

Schlagwörter

Stichwörter der Autor:innen

Ti2InB2anode materialdefect engineeringh‐MABlithium‐ion battery

Autor:innen und Institutionen

  • State Key Laboratory of Solidification Processing, Northwestern Polytechnical University, Xi'an, Shaanxi, 710072, P. R. China.
  • School of Materials Science and Engineering, Northwestern Polytechnical University, Xi'an, Shaanxi, 710072, P. R. China.

ORCID-Profile: Junjie Wang

Förderung

  • National Natural Science Foundation of China
  • National Key R&D Program of China
  • Fundamental Research Funds for the Central Universities
  • National Key Research and Development Program of China

Zitieren

APA

Shen, Q., Shi, Y., He, Y., & Wang, J. (2024). Defect Engineering of Hexagonal MAB Phase Ti 2 InB 2 as Anode of Lithium‐Ion Battery with Excellent Cycling Stability. Advanced Science, 11(21). https://doi.org/10.1002/advs.202308589

Vancouver

Shen Q, Shi Y, He Y, Wang J. Defect Engineering of Hexagonal MAB Phase Ti 2 InB 2 as Anode of Lithium‐Ion Battery with Excellent Cycling Stability. Advanced Science. 2024;11(21). doi:10.1002/advs.202308589

BibTeX
@article{Shen2024,
  author = {Shen, Qing and Shi, Yang and He, Yibo and Wang, Junjie},
  title = {Defect Engineering of Hexagonal MAB Phase Ti 2 InB 2 as Anode of Lithium‐Ion Battery with Excellent Cycling Stability},
  journal = {Advanced Science},
  year = {2024},
  volume = {11},
  number = {21},
  doi = {10.1002/advs.202308589}
}
Kostenlos starten →