Multiscale Carbon‐Integrated Silicon Anode for Stable Cycling Under Practical Lithium‐Ion Battery Conditions
Advanced Energy Materials · 2026-10 · 16 (39)
DOI: 10.1002/aenm.202504250 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Energy Materials, online erschienen am 07.11.2025. Verfasst von Young‐Ro Lee und 13 weiteren Autor:innen. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 91 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: Institute for Basic Science, National Research Foundation of Korea.
Abstract (Originalsprache)
Silicon‐based anodes offer exceptional energy density but are limited by severe volume changes and poor electrical conductivity, hindering their commercial integration. Herein, a silicon/carbon composite is designed for seamless incorporation into conventional graphite anodes, addressing the industry's focus on boosting practical energy density. This composite is obtained by simple, scalable vibratory milling of industrial waste silicon with functionally distinct carbon materials, meeting stringent requirements for both performance and cost. This multiscale carbon structuring mitigates silicon delamination, ensures continuous electronic pathways during volume fluctuations, and stabilizes the electrode–electrolyte interface. Detailed post‐mortem analyses confirm that this hierarchical carbon network effectively suppresses silicon extrusion—accompanied by significant morphological changes—a common failure mode. When implemented as a ≈17.5 wt.% additive into graphite electrodes, the composite achieves an industrially relevant target capacity of 500 mAh g −1 . It delivers outstanding performance under commercial‐level metrics, including a high areal capacity of 3 mAh cm −2 , electrode density of 1.6 g cm −3 , and active material ratio of 96.9 wt.%. In full‐cell configurations paired with a LiNi 0.6 Co 0.2 Mn 0.2 O 2 (NCM622) cathode, the system retains ≈78% capacity after 500 cycles, demonstrating its viability for real‐world applications. These results highlight the critical role of hierarchical carbon design for next‐generation lithium‐ion batteries.
Förderung
- Institute for Basic Science
- National Research Foundation of Korea
Zitieren
APA
Lee, Y., Hong, S. C., Kim, K., Park, J., Kim, J., Kang, B., Kim, Y., Lee, C., Son, S., Cho, B., Kim, J., Woo, S., Lee, G., & Kang, K. (2026). Multiscale Carbon‐Integrated Silicon Anode for Stable Cycling Under Practical Lithium‐Ion Battery Conditions. Advanced Energy Materials, 16(39). https://doi.org/10.1002/aenm.202504250
Vancouver
Lee Y, Hong SC, Kim K, Park J, Kim J, Kang B, et al. Multiscale Carbon‐Integrated Silicon Anode for Stable Cycling Under Practical Lithium‐Ion Battery Conditions. Advanced Energy Materials. 2026;16(39). doi:10.1002/aenm.202504250
BibTeX
@article{Lee2026,
author = {Lee, Young‐Ro and Hong, Seong Chul and Kim, Kyoungoh and Park, Jooha and Kim, Jihyeon and Kang, Byungwook and Kim, Youngsu and Lee, Chaelin and Son, Soogyeong and Cho, Byungmo and Kim, Junhyung and Woo, Sang‐Gil and Lee, Gwan‐Hyoung and Kang, Kisuk},
title = {Multiscale Carbon‐Integrated Silicon Anode for Stable Cycling Under Practical Lithium‐Ion Battery Conditions},
journal = {Advanced Energy Materials},
year = {2026},
volume = {16},
number = {39},
doi = {10.1002/aenm.202504250}
}
EUVIMED