EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

3D‐Printed Artificial Cilia Arrays: A Versatile Tool for Customizable Mechanosensing

Phillip Glass, Andy Shar, Charles Pemberton, Ethan Nguyen, Sung Hyun Park iD, Daeha Joung iD

Advanced Science · 2023-09 · 10 (26)

DOI: 10.1002/advs.202303164 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Science, online erschienen am 23.07.2023. Verfasst von Phillip Glass und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Physics, Virginia Commonwealth University, Richmond, VA, 23284, USA. Hauptthemen laut MEDLINE: Wearable Electronic Devices, Robotics, Artificial Limbs. Die Arbeit wurde bisher 23-mal zitiert (Crossref) und nennt 62 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Commonwealth Health Research Board, National Research Foundation of Korea.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Bio‐inspired cilium‐based mechanosensors offer a high level of responsiveness, making them suitable for a wide range of industrial, environmental, and biomedical applications. Despite great promise, the development of sensors with multifunctionality, scalability, customizability, and sensing linearity presents challenges due to the complex sensing mechanisms and fabrication methods involved. To this end, high‐aspect‐ratio polycaprolactone/graphene cilia structures with high conductivity, and facile fabrication are employed to address these challenges. For these 3D‐printed structures, an “inter‐cilium contact” sensing mechanism that enables the sensor to function akin to an on‐off switch, significantly enhancing sensitivity and reducing ambiguity in detection, is proposed. The cilia structures exhibit high levels of customizability, including thickness, height, spacing, and arrangement, while maintaining mechanical robustness. The simplicity of the sensor design enables highly sensitive detection in diverse applications, encompassing airflow and water flow monitoring, braille detection, and debris recognition. Overall, the unique conductive cilia‐based sensing mechanism that is proposed brings several advantages, advancing the development of multi‐sensing capabilities and flexible electronic skin applications in smart robotics and human prosthetics.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Wearable Electronic DevicesRoboticsArtificial LimbsHumansCiliaPrinting, Three-Dimensional

Stichwörter der Autor:innen

3D printingcilia arraysgraphene compositesmechanosensorstactile sensors

Autor:innen und Institutionen

  • Department of Physics, Virginia Commonwealth University, Richmond, VA, 23284, USA.
  • Sustainable Technology and Wellness R&D Group, Korea Institute of Industrial Technology (KITECH), Jeju-si, Jeju-do, 63243, Republic of Korea.
  • Massey Cancer Center, Virginia Commonwealth University, Richmond, VA, 23298, USA.
  • Institute for Sustainable Energy and Environment, Virginia Commonwealth University, Richmond, VA, 23284, USA.

ORCID-Profile: Sung Hyun Park, Daeha Joung

Förderung

  • Commonwealth Health Research Board
  • National Research Foundation of Korea

Zitieren

APA

Glass, P., Shar, A., Pemberton, C., Nguyen, E., Park, S. H., & Joung, D. (2023). 3D‐Printed Artificial Cilia Arrays: A Versatile Tool for Customizable Mechanosensing. Advanced Science, 10(26). https://doi.org/10.1002/advs.202303164

Vancouver

Glass P, Shar A, Pemberton C, Nguyen E, Park SH, Joung D. 3D‐Printed Artificial Cilia Arrays: A Versatile Tool for Customizable Mechanosensing. Advanced Science. 2023;10(26). doi:10.1002/advs.202303164

BibTeX
@article{Glass2023,
  author = {Glass, Phillip and Shar, Andy and Pemberton, Charles and Nguyen, Ethan and Park, Sung Hyun and Joung, Daeha},
  title = {3D‐Printed Artificial Cilia Arrays: A Versatile Tool for Customizable Mechanosensing},
  journal = {Advanced Science},
  year = {2023},
  volume = {10},
  number = {26},
  doi = {10.1002/advs.202303164}
}
Kostenlos starten →