EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Printable Polar Silicone Elastomers for Healable Supercapacitive Strain Sensors

Johannes von Szczepanski, Ellen Roels, Gilberto Siqueira, Patrick M. Danner, Jana Wolf, Julie Legrand, Joost Brancart, Seppe Terryn, Guy van Assche, Bram Vanderborght, Dorina M. Opris

Advanced Materials Technologies · 2023-12 · 8 (24)

DOI: 10.1002/admt.202301310 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Materials Technologies, online erschienen am 10.11.2023. Verfasst von Johannes von Szczepanski und 10 weiteren Autor:innen. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 49 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0). Gefördert von: Fonds Wetenschappelijk Onderzoek, Schweizerischer Nationalfonds zur Förderung der Wissenschaftlichen Forschung, H2020 European Research Council.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Soft strain sensors with high sensitivity and the ability to recover from damages are required in the emerging field of self‐healing soft robotics. Herein, printable supercapacitive strain sensors that can heal upon moderate heating (75 °C for 10 min) and exhibit a 30 times higher sensitivity than PDMS‐based sensors are developed. For the sensor's core layer and electrode, a nitrile‐functional polysiloxane that contains an active ionic initiator and can heal by siloxane equilibration at elevated temperatures is used. Supercapacitive strain sensors prepared from the elastomer are highly sensitive at low strains of 0–30%, enabled by the electric double‐layer formation of the ionic initiator. After healing, the sensors exhibit nearly unaltered performance in tensile testing. Due to the thermoreversible nature of the elastomer network, patterned core layers with different microstructures can be printed by direct ink writing. The capacitive sensors based on these microstructured films reach a higher sensitivity and linearity than those based on unstructured films. Finally, the sensor is integrated into a soft robotic finger and the sensor's ability to determine the bending angle is validated by motion capture. This technology can provide new opportunities to equip soft robotic devices with custom‐printed, healable strain sensors.

Förderung

  • Fonds Wetenschappelijk Onderzoek
  • Schweizerischer Nationalfonds zur Förderung der Wissenschaftlichen Forschung
  • H2020 European Research Council

Zitieren

APA

Szczepanski, J. V., Roels, E., Siqueira, G., Danner, P. M., Wolf, J., Legrand, J., Brancart, J., Terryn, S., Assche, G. V., Vanderborght, B., & Opris, D. M. (2023). Printable Polar Silicone Elastomers for Healable Supercapacitive Strain Sensors. Advanced Materials Technologies, 8(24). https://doi.org/10.1002/admt.202301310

Vancouver

Szczepanski JV, Roels E, Siqueira G, Danner PM, Wolf J, Legrand J, et al. Printable Polar Silicone Elastomers for Healable Supercapacitive Strain Sensors. Advanced Materials Technologies. 2023;8(24). doi:10.1002/admt.202301310

BibTeX
@article{Szczepanski2023,
  author = {Szczepanski, Johannes von and Roels, Ellen and Siqueira, Gilberto and Danner, Patrick M. and Wolf, Jana and Legrand, Julie and Brancart, Joost and Terryn, Seppe and Assche, Guy van and Vanderborght, Bram and Opris, Dorina M.},
  title = {Printable Polar Silicone Elastomers for Healable Supercapacitive Strain Sensors},
  journal = {Advanced Materials Technologies},
  year = {2023},
  volume = {8},
  number = {24},
  doi = {10.1002/admt.202301310}
}
Kostenlos starten →