3D‐Printing of Ultratough and Healable Elastomers
Advanced Materials · 2025-09 · 37 (38)
DOI: 10.1002/adma.202507908 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 02.07.2025. Verfasst von Hongfeng Mu und 10 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Chemical Engineering and Low-carbon Technology, College of Chemical and Biological Engineering, Zhejiang University, Hangzhou…. Die Arbeit wurde bisher 38-mal zitiert (Crossref) und nennt 37 Literaturangaben. Gefördert von: National Natural Science Foundation of China.
Abstract (Originalsprache)
Although 3D‐printing has offered a promising solution for the freeform fabrication of complex, arbitrary structures, developing elastomeric materials that simultaneously possess mechanical robustness and self‐healing functionality remains a significant challenge. To address this, a 3D‐printable elastomer is reported by the strategic incorporation of hierarchical hydrogen bonding (acylsemicarbazide and carbamate) into the photoactive resin, thereby overcoming the traditional trade‐off between mechanical strength and dynamic functionality. The resulting elastomer exhibits ultra‐toughness (158.5 MJ m −3 ), with tensile strength and breaking strain of 49.6 MPa and 1136%, respectively. In addition, the acylsemicarbazide moieties endow the 3D‐printed elastomers with unique dynamic characteristics, including self‐healing capabilities and shape reconfigurability, thus significantly enhancing the design flexibility and versatility of complex structures.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- State Key Laboratory of Chemical Engineering and Low-carbon Technology, College of Chemical and Biological Engineering, Zhejiang University, Hangzhou, 310058, China.
- Zhejiang Key Laboratory of Intelligent Manufacturing for Functional Chemicals, ZJU-Hangzhou Global Scientific and Technological Innovation Center, Zhejiang University, Hangzhou, 311215, China.
- Ningbo Innovation Center, Zhejiang University, Ningbo, 315807, China.
ORCID-Profile: Zizheng Fang
Förderung
- National Natural Science Foundation of China
Zitieren
APA
Mu, H., Sun, Z., Chen, J., Xu, C., Zhang, X., Pu, X., Zheng, N., Zhao, Q., Xie, T., Wu, J., & Fang, Z. (2025). 3D‐Printing of Ultratough and Healable Elastomers. Advanced Materials, 37(38). https://doi.org/10.1002/adma.202507908
Vancouver
Mu H, Sun Z, Chen J, Xu C, Zhang X, Pu X, et al. 3D‐Printing of Ultratough and Healable Elastomers. Advanced Materials. 2025;37(38). doi:10.1002/adma.202507908
BibTeX
@article{Mu2025,
author = {Mu, Hongfeng and Sun, Zhuo and Chen, Jiada and Xu, Chenyue and Zhang, Xiaoyu and Pu, Xingqun and Zheng, Ning and Zhao, Qian and Xie, Tao and Wu, Jingjun and Fang, Zizheng},
title = {3D‐Printing of Ultratough and Healable Elastomers},
journal = {Advanced Materials},
year = {2025},
volume = {37},
number = {38},
doi = {10.1002/adma.202507908}
}
EUVIMED