EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

3D‐Printed Anisotropic Nanofiber Composites with Gradual Mechanical Properties

Florian Lackner, Ivan Knechtl, Maximilian Novak, Chandran Nagaraj, Andreja Dobaj Štiglic, Rupert Kargl, Andrea Olschewski, Karin Stana Kleinschek, Tamilselvan Mohan

Advanced Materials Technologies · 2023-05 · 8 (10)

DOI: 10.1002/admt.202201708 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Materials Technologies, online erschienen am 03.02.2023. Verfasst von Florian Lackner und 8 weiteren Autor:innen. Die Arbeit wurde bisher 32-mal zitiert (Crossref) und nennt 79 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

3D printing of bio‐based nanomaterials into complex structures with design flexibility, structural anisotropy, and long‐term stability is a key issue for biomedical applications. Herein, 3D‐printed and ionically crosslinked structures with anisotropic, water‐proof, and tunable mechanical properties are fabricated using a polysaccharide ink composed of nanocellulose, alginate, and CaCO 3 nanoparticles. The excellent shear thinning properties of the ink, combined with double or even triple extrusion, allow printing of complex structures (tubes, buckets, ears, and boat models) with high shape fidelity even after crosslinking. The anisotropically printed and crosslinked structures can be mechanically tuned by controlling the fiber orientation via the printing path, the amount of crosslinker, the type of acid used for crosslinking (weak to strong), and the storage medium. This allows for tailored flexibility and a tensile modulus of the materials in wet state ranging from 1 to 30 MPa. Application of hydrostatic pressure of 160–600 mmHg for 24 h with a physiological fluid to a tubular structure, a model for the cardiovascular system, shows no leakage or rupture in the tube. The great design freedom offered by 3D printing and spatially controlled structural anisotropy enable the production of tailored materials for soft robotics or biomedical applications.

Zitieren

APA

Lackner, F., Knechtl, I., Novak, M., Nagaraj, C., Štiglic, A. D., Kargl, R., Olschewski, A., Kleinschek, K. S., & Mohan, T. (2023). 3D‐Printed Anisotropic Nanofiber Composites with Gradual Mechanical Properties. Advanced Materials Technologies, 8(10). https://doi.org/10.1002/admt.202201708

Vancouver

Lackner F, Knechtl I, Novak M, Nagaraj C, Štiglic AD, Kargl R, et al. 3D‐Printed Anisotropic Nanofiber Composites with Gradual Mechanical Properties. Advanced Materials Technologies. 2023;8(10). doi:10.1002/admt.202201708

BibTeX
@article{Lackner2023,
  author = {Lackner, Florian and Knechtl, Ivan and Novak, Maximilian and Nagaraj, Chandran and Štiglic, Andreja Dobaj and Kargl, Rupert and Olschewski, Andrea and Kleinschek, Karin Stana and Mohan, Tamilselvan},
  title = {3D‐Printed Anisotropic Nanofiber Composites with Gradual Mechanical Properties},
  journal = {Advanced Materials Technologies},
  year = {2023},
  volume = {8},
  number = {10},
  doi = {10.1002/admt.202201708}
}
Kostenlos starten →