EUVIMEDOpdag EUVIMED
Open access · CC BY 4.0

Low‐Loss Graded Dielectrics via Active Mixing of Nanocomposite Inks during 3D Printing

Bradley Duncan, Robert D. Weeks, Benjamin Barclay, Devon Beck, Patrick Bluem, Roberto Rojas, Maxwell Plaut, John Russo, Sebastien G. M. Uzel, Jennifer A. Lewis, Theodore Fedynyshyn

Advanced Materials Technologies · 2023-02 · 8 (3)

DOI: 10.1002/admt.202201496 ↗

At a glance

Journal article in Advanced Materials Technologies, published online on 2022-11-11. Written by Bradley Duncan and 10 co-authors. Cited 17 times so far (Crossref); 27 references. The full text is freely available (open access, CC BY 4.0). Funded by: U.S. Air Force, Uyttenboogaart-Eliasen Stichting.

AbstractBibliografiske oplysningerCiteRelated studies

Abstract (original language)

Additive manufacturing has emerged as a promising approach for fabricating graded refractive index structures that control the electromagnetic response of radio frequency (RF) devices. However, current 3D printing methods cannot produce continuous gradients from multiple materials. Here, low‐loss graded dielectrics via active mixing of nanocomposite inks composed of block copolymers and oxide nanoparticles are designed and printed. By simultaneously tailoring their rheological, printing, and their local filler particle‐to‐polymer ratio using an active mixing printhead, a conductive microstrip‐graded substrate matching network with a gradually changing dielectric response, is created. In these printed devices, the impedance of the RF signal is controlled by the graded substrate rather than by varying the conductive microstrip geometry, enabling the fabrication of smaller RF devices. This approach enables the rapid design and fabrication of high‐performance RF devices with locally tunable dielectric properties.

Funding

  • U.S. Air Force
  • Uyttenboogaart-Eliasen Stichting

Cite

APA

Duncan, B., Weeks, R. D., Barclay, B., Beck, D., Bluem, P., Rojas, R., Plaut, M., Russo, J., Uzel, S. G. M., Lewis, J. A., & Fedynyshyn, T. (2023). Low‐Loss Graded Dielectrics via Active Mixing of Nanocomposite Inks during 3D Printing. Advanced Materials Technologies, 8(3). https://doi.org/10.1002/admt.202201496

Vancouver

Duncan B, Weeks RD, Barclay B, Beck D, Bluem P, Rojas R, et al. Low‐Loss Graded Dielectrics via Active Mixing of Nanocomposite Inks during 3D Printing. Advanced Materials Technologies. 2023;8(3). doi:10.1002/admt.202201496

BibTeX
@article{Duncan2023,
  author = {Duncan, Bradley and Weeks, Robert D. and Barclay, Benjamin and Beck, Devon and Bluem, Patrick and Rojas, Roberto and Plaut, Maxwell and Russo, John and Uzel, Sebastien G. M. and Lewis, Jennifer A. and Fedynyshyn, Theodore},
  title = {Low‐Loss Graded Dielectrics via Active Mixing of Nanocomposite Inks during 3D Printing},
  journal = {Advanced Materials Technologies},
  year = {2023},
  volume = {8},
  number = {3},
  doi = {10.1002/admt.202201496}
}
Start for free →