Low‐Loss Graded Dielectrics via Active Mixing of Nanocomposite Inks during 3D Printing
Advanced Materials Technologies · 2023-02 · 8 (3)
DOI: 10.1002/admt.202201496 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Materials Technologies, online erschienen am 11.11.2022. Verfasst von Bradley Duncan und 10 weiteren Autor:innen. Die Arbeit wurde bisher 17-mal zitiert (Crossref) und nennt 27 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: U.S. Air Force, Uyttenboogaart-Eliasen Stichting.
Abstract (Originalsprache)
Additive manufacturing has emerged as a promising approach for fabricating graded refractive index structures that control the electromagnetic response of radio frequency (RF) devices. However, current 3D printing methods cannot produce continuous gradients from multiple materials. Here, low‐loss graded dielectrics via active mixing of nanocomposite inks composed of block copolymers and oxide nanoparticles are designed and printed. By simultaneously tailoring their rheological, printing, and their local filler particle‐to‐polymer ratio using an active mixing printhead, a conductive microstrip‐graded substrate matching network with a gradually changing dielectric response, is created. In these printed devices, the impedance of the RF signal is controlled by the graded substrate rather than by varying the conductive microstrip geometry, enabling the fabrication of smaller RF devices. This approach enables the rapid design and fabrication of high‐performance RF devices with locally tunable dielectric properties.
Förderung
- U.S. Air Force
- Uyttenboogaart-Eliasen Stichting
Zitieren
APA
Duncan, B., Weeks, R. D., Barclay, B., Beck, D., Bluem, P., Rojas, R., Plaut, M., Russo, J., Uzel, S. G. M., Lewis, J. A., & Fedynyshyn, T. (2023). Low‐Loss Graded Dielectrics via Active Mixing of Nanocomposite Inks during 3D Printing. Advanced Materials Technologies, 8(3). https://doi.org/10.1002/admt.202201496
Vancouver
Duncan B, Weeks RD, Barclay B, Beck D, Bluem P, Rojas R, et al. Low‐Loss Graded Dielectrics via Active Mixing of Nanocomposite Inks during 3D Printing. Advanced Materials Technologies. 2023;8(3). doi:10.1002/admt.202201496
BibTeX
@article{Duncan2023,
author = {Duncan, Bradley and Weeks, Robert D. and Barclay, Benjamin and Beck, Devon and Bluem, Patrick and Rojas, Roberto and Plaut, Maxwell and Russo, John and Uzel, Sebastien G. M. and Lewis, Jennifer A. and Fedynyshyn, Theodore},
title = {Low‐Loss Graded Dielectrics via Active Mixing of Nanocomposite Inks during 3D Printing},
journal = {Advanced Materials Technologies},
year = {2023},
volume = {8},
number = {3},
doi = {10.1002/admt.202201496}
}
EUVIMED