Band Alignment and Composition of the Buried TiO 2 /GaInP Interface
Advanced Materials Interfaces · 2026-08 · 13 (16)
DOI: 10.1002/admi.70598 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Materials Interfaces, online erschienen am 21.07.2026. Verfasst von David Ostheimer und 11 weiteren Autor:innen. Die Arbeit nennt 54 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Deutsche Forschungsgemeinschaft, Bundesministerium für Forschung und Technologie, Carl-Zeiss-Stiftung.
Abstract (Originalsprache)
Multi‐absorber III–V semiconductors represent the state of the art in high‐efficiency solar‐to‐electricity and solar‐to‐fuel conversion owing to their tunable bandgaps and favorable optoelectronic properties. GaInP is widely used in monolithic tandem devices as a top absorber or charge‐carrier‐selective contact because of its suitable electronic structure. However, GaInP and related III–V materials are prone to photocorrosion under photoelectrochemical (PEC) operation and require protective layers that ensure chemical and electronic passivation. Atomic layer deposition (ALD), particularly plasma‐enhanced ALD (PE‐ALD), enables conformal deposition of films that enhance interfacial stability while maintaining efficient selective charge carrier transport. Here, the band alignment at the GaInP(100)/ interface is examined to determine whether the initial GaInP surface condition–either an atomically well‐defined, phosphorus‐rich surface or a naturally oxidized surface–affects interface formation during mild, low‐power remote oxygen PE‐ALD. Angle‐dependent X‐ray and ultraviolet photoelectron spectroscopy were used to probe the chemical and electronic structure of the buried interfaces. The results show that interface composition and band alignment are largely insensitive to the initial surface condition, with only minor differences in attenuation and interfacial energetics. These findings demonstrate the robustness of mild PE‐ALD for reproducible interface formation and support the design of protected III–V photoelectrodes for PEC applications.
Förderung
- Deutsche Forschungsgemeinschaft
- Bundesministerium für Forschung und Technologie
- Carl-Zeiss-Stiftung
Zitieren
APA
Ostheimer, D., Shekarabi, S., Kühne, J., Pour, M. A. Z., Hanke, K. D., Bohlemann, C. Y., Koch, J., Bienek, O., Paszuk, A., Jaegermann, W., Sharp, I. D., & Hannappel, T. (2026). Band Alignment and Composition of the Buried TiO 2 /GaInP Interface. Advanced Materials Interfaces, 13(16). https://doi.org/10.1002/admi.70598
Vancouver
Ostheimer D, Shekarabi S, Kühne J, Pour MAZ, Hanke KD, Bohlemann CY, et al. Band Alignment and Composition of the Buried TiO 2 /GaInP Interface. Advanced Materials Interfaces. 2026;13(16). doi:10.1002/admi.70598
BibTeX
@article{Ostheimer2026,
author = {Ostheimer, David and Shekarabi, Sahar and Kühne, Julius and Pour, Mohammad Amin Zare and Hanke, Kai Daniel and Bohlemann, Chris Yannic and Koch, Juliane and Bienek, Oliver and Paszuk, Agnieszka and Jaegermann, Wolfram and Sharp, Ian D. and Hannappel, Thomas},
title = {Band Alignment and Composition of the Buried TiO 2 /GaInP Interface},
journal = {Advanced Materials Interfaces},
year = {2026},
volume = {13},
number = {16},
doi = {10.1002/admi.70598}
}
EUVIMED