EUVIMEDEUVIMED entdecken
Crossref

Durable Monolayer MoS 2 |GaInP Interface for Photoelectrochemical Hydrogen Generation

Demelza Wright, Logan Wilder, Debjit Ghoshal, Lauren Hurley, Jacob Shelton, Quinn Carvalho, Jao van de Lagemaat, William McMahon, James L. Young, Todd G Deutsch, Elisa Miller-Link

ECS Meeting Abstracts · 07.07.2026 · MA2026-01 (13) · 982-982

DOI: 10.1149/ma2026-0113982mtgabs ↗

Kurz gefasst

Fachartikel in der Zeitschrift ECS Meeting Abstracts, erschienen am 07.07.2026. Verfasst von Demelza Wright und 10 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Gallium indium phosphide (GaInP) is a large-bandgap semiconductor and a promising candidate for the top cell in a tandem cell for photoelectrochemical (PEC) water splitting. While GaInP shows excellent initial performance, chemical instability during photoelectrochemical water splitting operation severely decreases performance over time and is an immediate concern for GaInP and other semiconductors used in PEC schemes. One strategy to protect GaInP which has been previously demonstrated is addition of a top layer of MoS x generated in situ by electrochemical deposition or by sulfurization of a layer of Mo 0 , both approaches which produce polycrystalline multilayer MoS x films on the scale of ⁓5 nm. In this work, well-defined, laterally large (cm-scale) single layer MoS 2 is grown and transferred onto GaInP as a protective layer during photoelectrochemical hydrogen evolution in acidic electrolyte with an applied bias and ⁓1 sun illumination. Remarkably, it is found that single layer MoS 2 adheres to GaInP during vigorous H 2 bubble formation under 1 sun illumination for 100 h, and further, the underlying GaInP shows a reduced rate of degradation in comparison to bare GaInP. Bare GaInP loses ~50% current density over the 100h operation. Our monolayer MoS 2 |GaInP devices were much more stable and only lost around ~20% current density. This should be compared with literature examples of thicker ~5nm layers of MoS x which lose around 13% efficiency over the same timeframe – our monolayer system retains most of the protective qualities from thicker layers with a small fraction of the material.

Zitieren

APA

Wright, D., Wilder, L., Ghoshal, D., Hurley, L., Shelton, J., Carvalho, Q., Lagemaat, J. V. D., McMahon, W., Young, J. L., Deutsch, T. G., & Miller-Link, E. (2026). Durable Monolayer MoS 2 |GaInP Interface for Photoelectrochemical Hydrogen Generation. ECS Meeting Abstracts, MA2026-01(13), 982-982. https://doi.org/10.1149/ma2026-0113982mtgabs

Vancouver

Wright D, Wilder L, Ghoshal D, Hurley L, Shelton J, Carvalho Q, et al. Durable Monolayer MoS 2 |GaInP Interface for Photoelectrochemical Hydrogen Generation. ECS Meeting Abstracts. 2026;MA2026-01(13):982-982. doi:10.1149/ma2026-0113982mtgabs

BibTeX
@article{Wright2026,
  author = {Wright, Demelza and Wilder, Logan and Ghoshal, Debjit and Hurley, Lauren and Shelton, Jacob and Carvalho, Quinn and Lagemaat, Jao van de and McMahon, William and Young, James L. and Deutsch, Todd G and Miller-Link, Elisa},
  title = {Durable Monolayer MoS 2 |GaInP Interface for Photoelectrochemical Hydrogen Generation},
  journal = {ECS Meeting Abstracts},
  year = {2026},
  volume = {MA2026-01},
  number = {13},
  pages = {982--982},
  doi = {10.1149/ma2026-0113982mtgabs}
}
Kostenlos starten →