Synergistic Bimolecular Reconstruction of the Perovskite‐Carbon Interface Enables 23.6%‐Efficiency Fully Printable Mesoscopic Perovskite Solar Cells
Advanced Materials · 17.11.2026
DOI: 10.1002/adma.75734 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 17.11.2026. Verfasst von Yongming Ma und 12 weiteren Autor:innen. Beteiligte Einrichtung: Michael Grätzel Center for Mesoscopic Solar Cells, Wuhan National Laboratory for Optoelectronics, Huazhong University of Science and Technology, Wuha…. Die Arbeit nennt 39 Literaturangaben. Gefördert von: National Natural Science Foundation of China, China Postdoctoral Science Foundation, Innovation Fund of Wuhan National Laboratory for Optoelectronics.
Abstract (Originalsprache)
Hole‐conductor‐free, fully printable mesoscopic perovskite solar cells (p‐MPSCs) hold compelling promise for photovoltaic industrialization. However, their power conversion efficiency (PCE) remains constrained by limited hole collection at the perovskite‐carbon interface. Here, we introduce a synergistic bimolecular post‐treatment using toluene diisocyanate (TDI) and 4‐methyl sulfonyl phenyl methylammonium chloride (MSBH) to reconstruct this critical interface. We demonstrate that TDI reacts with surface formamidinium to polish and activate the perovskite terminations, while MSBH subsequently grafts onto this activated surface. This combined action simultaneously reconstructs the interface with optimized surface energy band bending and minimized interfacial defects, thereby facilitating hole extraction and suppressing non‐radiative recombination. Consequently, this strategy elevates the PCE of small‐area p‐MPSCs (0.1 cm 2 ) to 23.6%. Furthermore, it enables the fabrication of a p‐MPSC minimodule with an active area of 52.7 cm 2 , achieving a PCE of 22.1%, among the highest values ever reported for carbon‐based, fully printable architectures. Devices retained 98% of their initial PCE after 750 h of operational stability testing at 55°C ± 5°C. This work provides an effective interface reconstruction strategy that concurrently addresses defect passivation and energy alignment, paving the way for high‐performance, stable, and scalable cost‐effective perovskite photovoltaics.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Michael Grätzel Center for Mesoscopic Solar Cells, Wuhan National Laboratory for Optoelectronics, Huazhong University of Science and Technology, Wuhan, Hubei, People's Republic of China.
- WonderSolar Institute, Wuhan, Hubei, People's Republic of China.
- School of Chemistry and Chemical Engineering, Huazhong University of Science and Technology, Wuhan, Hubei, People's Republic of China.
ORCID-Profile: Jiale Liu, Chuanzhou Han, Yang Zhou, Zhongan Li, Yinhua Zhou, Anyi Mei, Hongwei Han
Förderung
- National Natural Science Foundation of China
- China Postdoctoral Science Foundation
- Innovation Fund of Wuhan National Laboratory for Optoelectronics
Zitieren
APA
Ma, Y., Liu, J., Chen, X., Qi, J., Jiang, S., Han, C., Liu, S., She, B., Zhou, Y., Li, Z., Zhou, Y., Mei, A., & Han, H. (2026). Synergistic Bimolecular Reconstruction of the Perovskite‐Carbon Interface Enables 23.6%‐Efficiency Fully Printable Mesoscopic Perovskite Solar Cells. Advanced Materials. https://doi.org/10.1002/adma.75734
Vancouver
Ma Y, Liu J, Chen X, Qi J, Jiang S, Han C, et al. Synergistic Bimolecular Reconstruction of the Perovskite‐Carbon Interface Enables 23.6%‐Efficiency Fully Printable Mesoscopic Perovskite Solar Cells. Advanced Materials. 2026. doi:10.1002/adma.75734
BibTeX
@article{Ma2026,
author = {Ma, Yongming and Liu, Jiale and Chen, Xiayan and Qi, Jianhang and Jiang, Siqi and Han, Chuanzhou and Liu, Shuang and She, Bin and Zhou, Yang and Li, Zhongan and Zhou, Yinhua and Mei, Anyi and Han, Hongwei},
title = {Synergistic Bimolecular Reconstruction of the Perovskite‐Carbon Interface Enables 23.6%‐Efficiency Fully Printable Mesoscopic Perovskite Solar Cells},
journal = {Advanced Materials},
year = {2026},
doi = {10.1002/adma.75734}
}
EUVIMED