EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Impact of Anode to Cathode Crossover in Lithium‐metal Batteries With High‐Nickel Cathodes

Zezhou Guo iD, Andrei Dolocan iD, Arumugam Manthiram iD

Advanced Materials · 2026-03 · 38 (13)

DOI: 10.1002/adma.202518490 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 21.01.2026. Verfasst von Zezhou Guo und 2 weiteren Autor:innen. Beteiligte Einrichtung: Materials Science and Engineering Program and Walker Department of Mechanical Engineering, The University of Texas at Austin, Austin, Texas, USA. Die Arbeit wurde bisher 15-mal zitiert (Crossref) und nennt 60 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: Department of Energy through the Advanced Battery Materials Research.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The advancement of high‐energy‐density lithium‐metal batteries (LMBs) is hindered by the chemical instability of both lithium‐metal anode and high‐nickel layered oxide cathodes. While cathode‐to‐anode crossover is well‐documented, the reverse process of anode‐to‐cathode crossover remains underexplored. Here, we systematically investigate such crossovers and the degradation pathway in pouch cells with a localized high‐concentration electrolyte, comparing NMC622, NMC811, and NMC90 cathodes paired with lithium‐metal and graphite anodes. Despite delivering higher initial capacities, LMBs exhibit faster capacity fade under long‐term cycling at 45 °C. To isolate cathode‐side degradation, galvanostatic electrochemical impedance spectroscopy (GEIS) measurements of cycled cathodes paired with delithiated lithium iron phosphate (LFP) counter electrodes reveal significantly higher charge‐transfer resistance in cathodes cycled with lithium‐metal. Surface characterization via X‐ray photoelectron spectroscopy (XPS) and time‐of‐flight secondary ion mass spectrometry (ToF‐SIMS) reveals greater electrolyte decomposition on cathodes cycled with lithium metal, leading to thicker, more organic‐rich cathode–electrolyte interphases (CEIs), consistent with the elevated charge‐transfer resistance observed in GEIS measurements. Notably, NMC90 shows the most pronounced CEI thickening, linking higher cathode surface reactivity to greater susceptibility to anode‐to‐cathode crossover. This work presents compelling evidence of crosstalk degradation originating from lithium‐metal anodes and underscores the importance of cross‐interface stability for the design of durable LMBs.

Schlagwörter

Stichwörter der Autor:innen

anode‐to‐cathode crossoverhigh‐nickel cathodesimpedance spectroscopyinterphaseslithium‐metal batteries

Autor:innen und Institutionen

  • Materials Science and Engineering Program and Walker Department of Mechanical Engineering, The University of Texas at Austin, Austin, Texas, USA.

ORCID-Profile: Zezhou Guo, Andrei Dolocan, Arumugam Manthiram

Förderung

  • Department of Energy through the Advanced Battery Materials Research

Zitieren

APA

Guo, Z., Dolocan, A., & Manthiram, A. (2026). Impact of Anode to Cathode Crossover in Lithium‐metal Batteries With High‐Nickel Cathodes. Advanced Materials, 38(13). https://doi.org/10.1002/adma.202518490

Vancouver

Guo Z, Dolocan A, Manthiram A. Impact of Anode to Cathode Crossover in Lithium‐metal Batteries With High‐Nickel Cathodes. Advanced Materials. 2026;38(13). doi:10.1002/adma.202518490

BibTeX
@article{Guo2026,
  author = {Guo, Zezhou and Dolocan, Andrei and Manthiram, Arumugam},
  title = {Impact of Anode to Cathode Crossover in Lithium‐metal Batteries With High‐Nickel Cathodes},
  journal = {Advanced Materials},
  year = {2026},
  volume = {38},
  number = {13},
  doi = {10.1002/adma.202518490}
}
Kostenlos starten →