Ultralight and Ablation‐Resistant Shape‐Memory Ceramizable Polymer Aerogel for Self‐Adaptive Thermal Protection
Advanced Materials · 2026-02 · 38 (8)
DOI: 10.1002/adma.202516627 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 26.11.2025. Verfasst von Tuo Liu und 6 weiteren Autor:innen. Beteiligte Einrichtung: Key Laboratory of Synthetic and Biological Colloids, Ministry of Education, School of Chemical and Material Engineering, Jiangnan University, Wuxi, 2…. Die Arbeit wurde bisher 20-mal zitiert (Crossref) und nennt 51 Literaturangaben. Gefördert von: National Natural Science Foundation of China, National Key Research and Development Program of China, Basic Research Program of Jiangsu.
Abstract (Originalsprache)
Deployable thermal protection systems (DTPS) for deep‐space exploration require materials that integrate lightweight design, high deformability, and extreme temperature resistance. However, existing shape memory polymers (SMPs) suffer from limited thermal stability, while shape memory ceramics (SMCs) lack rapid programmability and efficient deployment capability. To overcome these limitations, a shape‐memory ceramizable polymer aerogel (SMCPA) is developed capable of sequential self‐adaptive thermo‐responsive behavior, enabling the integration of structural deployment and thermal protection within a single material system. Upon exposure to high temperatures, SMCPA first undergoes rapid shape recovery to increase the projected area, followed by in situ ceramization at elevated temperatures to form a continuous ablation‐resistant ceramic layer. The resultant SMCPA combines ultralow density (0.12 ± 0.02 g cm −3 ), outstanding shape‐memory performance (shape fixation ratio of 97.0 ± 0.5% and shape recovery ratio of 94.2 ± 0.6%), with remarkable ablation resistance (mass ablation rate of 0.012 ± 0.003 g s −1 under 1.5 MW m −2 heat flux), outperforming conventional SMPs and SMCs in its ability to simultaneously provide programmable shape change and high‐temperature stability. This study demonstrates that SMCPA successfully reconciles the conflict between lightweight deployable structures and high‐temperature thermal protection, offering a promising material solution for next‐generation DTPS in deep‐space missions.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Key Laboratory of Synthetic and Biological Colloids, Ministry of Education, School of Chemical and Material Engineering, Jiangnan University, Wuxi, 214122, P. R. China.
- State Key Laboratory of Advanced Fiber Materials, College of Materials Science and Engineering, Donghua University, Shanghai, 201620, P. R. China.
ORCID-Profile: Wei Fan
Förderung
- National Natural Science Foundation of China
- National Key Research and Development Program of China
- Basic Research Program of Jiangsu
- Fundamental Research Funds for the Central Universities
- Jiangsu Province Postdoctoral Science Foundation
- Postdoctoral Fellowship Program of CPSF
Zitieren
APA
Liu, T., Xue, T., Yang, S., Zhang, X., Zhang, C., Fan, W., & Liu, T. (2026). Ultralight and Ablation‐Resistant Shape‐Memory Ceramizable Polymer Aerogel for Self‐Adaptive Thermal Protection. Advanced Materials, 38(8). https://doi.org/10.1002/adma.202516627
Vancouver
Liu T, Xue T, Yang S, Zhang X, Zhang C, Fan W, et al. Ultralight and Ablation‐Resistant Shape‐Memory Ceramizable Polymer Aerogel for Self‐Adaptive Thermal Protection. Advanced Materials. 2026;38(8). doi:10.1002/adma.202516627
BibTeX
@article{Liu2026,
author = {Liu, Tuo and Xue, Tiantian and Yang, Shibai and Zhang, Xu and Zhang, Chao and Fan, Wei and Liu, Tianxi},
title = {Ultralight and Ablation‐Resistant Shape‐Memory Ceramizable Polymer Aerogel for Self‐Adaptive Thermal Protection},
journal = {Advanced Materials},
year = {2026},
volume = {38},
number = {8},
doi = {10.1002/adma.202516627}
}
EUVIMED