Heat-Responsive PLA/PU/MXene Shape Memory Polymer Blend Nanocomposite: Mechanical, Thermal, and Shape Memory Properties
Polymers · 26.01.2025 · 17 (3) · 338
DOI: 10.3390/polym17030338 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 26.01.2025. Verfasst von Rajita Sanaka und 7 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical Engineering, VIT-AP University, Besides A.P. Secretariat, Amaravati 522237, Andhra Pradesh, India. Die Arbeit wurde bisher 37-mal zitiert (Crossref) und nennt 47 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: VIT-AP University.
Abstract (Originalsprache)
This study investigates the fabrication and characterization of heat-responsive PLA/PU/MXene shape memory polymer blend nanocomposites with varying PLA content (10, 20, 30, and 50%) and a fixed MXene content of 0.5 wt.%. The results indicate significant improvements in mechanical properties, with the 50% PLA/PU/MXene blend showing a 300% increase in ultimate tensile strength and a 90% decrease in % elongation compared to pure PU. Additionally, the 50% blend exhibited a 400% increase in flexural strength. Microstructural analysis revealed dispersed pores and sea–island morphology in pure PU and the 50% PLA/PU/MXene blend. Thermal analysis using DSC showed an increase in crystallinity from 33% (pure PU) to 45% for the 50% PLA/PU/MXene blend, indicating enhanced crystalline domains due to the semi-crystalline nature of PLA and MXene’s influence on molecular ordering. TGA demonstrated a significant improvement in thermal stability, with the onset temperature rising from 185 °C (pure PU) to 212 °C and the degradation temperature increasing from 370 °C to 425 °C for the 50% blend, attributed to the rigid structure of PLA and MXene’s stabilizing effect. Shape memory testing revealed that the 30% PLA/PU/MXene blend achieved the best shape fixity and recovery with optimal performance, whereas higher PLA content diminished shape memory behavior.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Mechanical Engineering, VIT-AP University, Besides A.P. Secretariat, Amaravati 522237, Andhra Pradesh, India.
- Department of Mechanical Engineering, Yeshwantrao Chavan College of Engineering, Nagpur 441110, Maharashtra, India.
- Division of Research and Development, Lovely Professional University, Phagwara 144411, Punjab, India.
- Centre for Research Impact & Outcome, Chitkara University Institute of Engineering and Technology, Chitkara University, Rajpura 140401, Punjab, India.
- Surfactants Research Chair, Department of Chemistry, College of Science, King Saud University, P.O. Box 2455, Riyadh 11451, Saudi Arabia.
- School of Computing & Engineering Technology, Robert Gordon University, Garthdee Road, Aberdeen AB10 7QB, UK.
ORCID-Profile: Rajita Sanaka, Santosh Kumar Sahu, P S Rama Sreekanth, Jayant Giri, Faruq Mohammad, Hamad A Al-Lohedan, Mohd Shahneel Saharudin, Quanjin Ma
Förderung
- VIT-AP University
Zitieren
APA
Sanaka, R., Sahu, S. K., Sreekanth, P. S. R., Giri, J., Mohammad, F., Al-Lohedan, H. A., Saharudin, M. S., & Ma, Q. (2025). Heat-Responsive PLA/PU/MXene Shape Memory Polymer Blend Nanocomposite: Mechanical, Thermal, and Shape Memory Properties. Polymers, 17(3), 338. https://doi.org/10.3390/polym17030338
Vancouver
Sanaka R, Sahu SK, Sreekanth PSR, Giri J, Mohammad F, Al-Lohedan HA, et al. Heat-Responsive PLA/PU/MXene Shape Memory Polymer Blend Nanocomposite: Mechanical, Thermal, and Shape Memory Properties. Polymers. 2025;17(3):338. doi:10.3390/polym17030338
BibTeX
@article{Sanaka2025,
author = {Sanaka, Rajita and Sahu, Santosh Kumar and Sreekanth, P S Rama and Giri, Jayant and Mohammad, Faruq and Al-Lohedan, Hamad A and Saharudin, Mohd Shahneel and Ma, Quanjin},
title = {Heat-Responsive PLA/PU/MXene Shape Memory Polymer Blend Nanocomposite: Mechanical, Thermal, and Shape Memory Properties},
journal = {Polymers},
year = {2025},
volume = {17},
number = {3},
pages = {338},
doi = {10.3390/polym17030338}
}
EUVIMED