EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Ultrathin, Stretchable, and 3D‐Printable Complementary Nanotubes–Polymer Composites for Multimodal Radiation Shielding in Extreme Environments

Flandy, Kun Kim, Jaehyoung Ko, Daeun Kim, Daekwon Lee, Heesuk Rho, Sang Seok Lee, Dong Su Lee, Se Gyu Jang, Seokhoon Ahn, Seung-Yeol Jeon, Dae-Young Jeon und 1 weitere

Advanced Materials · 2026-03 · 38 (18)

DOI: 10.1002/adma.202513805 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 04.03.2026. Verfasst von Flandy und 12 weiteren Autor:innen. Beteiligte Einrichtung: Extreme Environment Shielding Material Research Center, Korea Institute of Science and Technology, Wanju-gun, Jeonbuk, Republic of Korea. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 59 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: National Research Foundation of Korea, Glocal University 30 Project Fund of Gyeongsang National University in 2024.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A novel material system capable of simultaneously attenuating electromagnetic interference (EMI) and neutron radiation, while retaining multifunctionality such as lightweight and mechanical stretchability, is urgently needed for versatile passivation platforms in advanced aerospace, defense, medical, and next‐generation electronic applications operating under extreme environments. Here, we report (1) a neat composite comprising complementary nanotubes (boron nitride nanotubes, BNNTs, and single‐walled carbon nanotubes, SWCNTs) for dual‐mode attenuation that includes EMI and neutron shielding, and (2) its extension into a 3D‐printed architecture using an intrinsically stretchable polydimethylsiloxane (PDMS) matrix, which altogether enables a robust and conformable shielding architecture for emerging applications. Utilizing direct ink writing, we achieve scalable fabrication of structurally complex geometries (e.g., freestanding honeycomb lattices) with tunable mechanical and shielding properties. The resulting neat composites demonstrate EMI shielding effectiveness exceeding 50 dB and neutron attenuation coefficient of 1.27 mm −1 (equivalent to ∼72% attenuation at a mm thickness) at thicknesses on the order of tens of micrometers, where the polymer composites exhibit the shielding effectiveness up to 23 dB at sub‐millimeter thicknesses while maintaining mechanical resilience under cyclic strain and thermal extremes (–196°C to 250°C). These findings present a lightweight and robust shielding strategy for next‐generation electronics in harsh environments.

Schlagwörter

Stichwörter der Autor:innen

3D printingboron nitride nanotubeselectromagnetic interference shieldingextreme environmentsneutron shieldingsingle‐walled carbon nanotubes

Autor:innen und Institutionen

  • Extreme Environment Shielding Material Research Center, Korea Institute of Science and Technology, Wanju-gun, Jeonbuk, Republic of Korea.
  • Nanoscience and Technology, KIST School, Korea National University of Science and Technology (UST), Daejeon, Republic of Korea.
  • Department of JBNU-KIST Industry Academia Convergence Research, Jeonbuk National University, Jeonju, Jeonbuk, Republic of Korea.
  • School of Materials Science and Engineering, Gwangju Institute of Science and Technology (GIST), Gwangju, Republic of Korea.
  • Department of Physics, Research Institute for Materials and Energy Sciences, Jeonbuk National University, Jeonju, Republic of Korea.
  • Department of Electrical Engineering, Gyeongsang National University, Jinju-si, Gyeongsangnam-do, Republic of Korea.

ORCID-Profile: Yongho Joo

Förderung

  • National Research Foundation of Korea
  • Glocal University 30 Project Fund of Gyeongsang National University in 2024

Zitieren

APA

Flandy, Kim, K., Ko, J., Kim, D., Lee, D., Rho, H., Lee, S. S., Lee, D. S., Jang, S. G., Ahn, S., Jeon, S. Y., Jeon, D. Y., & Joo, Y. (2026). Ultrathin, Stretchable, and 3D‐Printable Complementary Nanotubes–Polymer Composites for Multimodal Radiation Shielding in Extreme Environments. Advanced Materials, 38(18). https://doi.org/10.1002/adma.202513805

Vancouver

Flandy, Kim K, Ko J, Kim D, Lee D, Rho H, et al. Ultrathin, Stretchable, and 3D‐Printable Complementary Nanotubes–Polymer Composites for Multimodal Radiation Shielding in Extreme Environments. Advanced Materials. 2026;38(18). doi:10.1002/adma.202513805

BibTeX
@article{Flandy2026,
  author = {Flandy and Kim, Kun and Ko, Jaehyoung and Kim, Daeun and Lee, Daekwon and Rho, Heesuk and Lee, Sang Seok and Lee, Dong Su and Jang, Se Gyu and Ahn, Seokhoon and Jeon, Seung-Yeol and Jeon, Dae-Young and Joo, Yongho},
  title = {Ultrathin, Stretchable, and 3D‐Printable Complementary Nanotubes–Polymer Composites for Multimodal Radiation Shielding in Extreme Environments},
  journal = {Advanced Materials},
  year = {2026},
  volume = {38},
  number = {18},
  doi = {10.1002/adma.202513805}
}
Kostenlos starten →