Anisotropic 3D‐Printed Carbon Fiber‐Reinforced Liquid Metal Elastomer for Synergistic Enhancement of Electrical Conductivity, Thermal Performance, and Leakage Resistance
Advanced Materials · 2026-01 · 38 (3)
DOI: 10.1002/adma.202511498 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 04.10.2025. Verfasst von Xiaohui Shan und 12 weiteren Autor:innen. Beteiligte Einrichtung: School of Biomedical Engineering, Tsinghua University, Beijing, 100084, China. Die Arbeit wurde bisher 26-mal zitiert (Crossref) und nennt 35 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Natural Science Foundation of Jiangsu Province, McGovern Institute for Brain Research, Massachusetts Institute of Technology.
Abstract (Originalsprache)
Developing multifunctional composites with high electrical/thermal conductivity and excellent flexibility remains a critical challenge for flexible electronics and thermal management systems. While liquid metal elastomers offer intrinsic softness and conductivity, their real‐world application is hindered by the trade‐off between outstanding dual conductivity (electrical and thermal) and leakage resistance. To tackle this issue, high‐stability carbon fiber‐reinforced liquid metal elastomer (CFLME) is fabricated via an integrated method: Ni plating on carbon fiber to enhance reactive wetting with liquid metal, followed by composite formation with elastomer and 3D printing for directional fiber alignment, yielding anisotropic CFLME. Such anisotropic architecture enables efficient conductive pathways along fiber axes, reducing the electrical percolation threshold to 25%, achieving a high electrical conductivity of 3.44 × 10⁵ S/m, and a thermal conductivity of 7.26 W/(m∙K). The fiber network securely locks liquid metal, enabling zero leakage under 400% strain, 1000‐cycle stretching, or 833 kPa compression. For practical applications, CFLME exhibits exceptional electromagnetic shielding (93.74 dB), high‐sensitivity biosensing with an 82.62 dB signal‐to‐noise ratio, and efficient thermal management (16 °C reduction vs liquid metal elastomer). This work demonstrates a dual‐innovation strategy of structural design and interfacial regulation, providing a robust solution for flexible electronics and thermal management applications with balanced performance.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Biomedical Engineering, Tsinghua University, Beijing, 100084, China.
- Institute for Frontier Science, Nanjing University of Aeronautics and Astronautics, Nanjing, 210016, China.
- Research Institute of Petroleum Processing, SINOPEC, Beijing, 100083, China.
- Center of Double Helix, Tsinghua Shenzhen International Graduate School, Tsinghua University, Shenzhen, 518055, China.
- State Key Laboratory of Cryogenic Science and Technology, Technical Institute of Physics and Chemistry, Chinese Academy of Sciences, Beijing, 100190, China.
- School of Engineering Medicine, Beihang University, Beijing, 100191, China.
ORCID-Profile: Jing Liu
Förderung
- National Natural Science Foundation of China
- Natural Science Foundation of Jiangsu Province
- McGovern Institute for Brain Research, Massachusetts Institute of Technology
- Fundamental Research Funds for the Central Universities
Zitieren
APA
Shan, X., Chen, S., Feng, W., Zhu, X., Wang, B., Zhang, X., Yuan, R., Gao, J., Cui, Z., Xu, H., Liao, X., Wu, B., & Liu, J. (2026). Anisotropic 3D‐Printed Carbon Fiber‐Reinforced Liquid Metal Elastomer for Synergistic Enhancement of Electrical Conductivity, Thermal Performance, and Leakage Resistance. Advanced Materials, 38(3). https://doi.org/10.1002/adma.202511498
Vancouver
Shan X, Chen S, Feng W, Zhu X, Wang B, Zhang X, et al. Anisotropic 3D‐Printed Carbon Fiber‐Reinforced Liquid Metal Elastomer for Synergistic Enhancement of Electrical Conductivity, Thermal Performance, and Leakage Resistance. Advanced Materials. 2026;38(3). doi:10.1002/adma.202511498
BibTeX
@article{Shan2026,
author = {Shan, Xiaohui and Chen, Sen and Feng, Weichen and Zhu, Xiyu and Wang, Bo and Zhang, Xudong and Yuan, Ruizhi and Gao, Jianye and Cui, Ziliang and Xu, Hanchi and Liao, Xin and Wu, Bingjie and Liu, Jing},
title = {Anisotropic 3D‐Printed Carbon Fiber‐Reinforced Liquid Metal Elastomer for Synergistic Enhancement of Electrical Conductivity, Thermal Performance, and Leakage Resistance},
journal = {Advanced Materials},
year = {2026},
volume = {38},
number = {3},
doi = {10.1002/adma.202511498}
}
EUVIMED